Steel T Post Activator
Combination insulator and attachment for receiving an insulated gate handle.
Designed to fit between the T post studs.
Instructions/Diagrams:
Specs
- 3.5"L x 2.5"W x 1.75"H
- Stainless steel plate
- Joint clamp is zinc/nickel with a stainless steel nut
Installation
- Hook the short side of the insulator onto T post.
- Pull or push the long side of insulator around the front of post.
- Hook long side around the back of post.
- To connect the electrical flow to the activator and gate, attach a piece of insulated wire from the fence to the split-bolt-joint clamp on activator. (Loosen nut from joint clamp, shed off approximately 2" of insulation from the insulated wire, and then slip the bare wire into slot of joint clamp. Tighten nut.) A SafeHandle will hook into the open hole on metal bar of activator.
- When the handle is connected, the gate is energized. When the handle is not connected, the gate is not energized.
- If the fence is continuing on from the gate, use insulated wire under the gate to feed the other side of the fence.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Gates
SafeHandle, white
Item #339600 -Use these handy gate handles to enter and exit temporary gate openings. Spring loaded.
$4.50 -
Gates
SafeHandle, black
Item #339500 -Use these handy gate handles to enter and exit temporary gate openings. Spring loaded.
$4.50 -
Gates
Premium Gate Handle
Item #339501 -High quality, spring-loaded gate handle for electric fences. Internal spring maintains strain on low-tension conductors.
$4.50 -
Handling Equipment
Galvanized Steel T Post, 6 ft
Item #327600 -Thick galvanized coating protects posts from the elements. Excellent supports for portable, permanent and high-tensile fence systems.
$24.50 -
Handling Equipment
Galvanized Steel T Post, 7 ft
Item #327800 -Thick galvanized coating protects posts from the elements. Excellent supports for portable, permanent and high-tensile fence systems.
$25.50 -
Fence Connectors and Accessories
MaxiShock Insulated Cable, 10'
Item #163900 -Insulated cable for high voltage electric fence pulses. Carries power from the energizer to the fence or ground system.
$7.00
Write a Review
You must be logged in to leave a review. Please sign in.
Mark R from Wisconsin
I’ll be getting more of these. I wish I’d have found them sooner. Easy to use and better then creating your own loop with wire for hooking to.
Joann B from Wisconsin
I LOVE these insulators! Although they are a bit pricey. They are so easy to install and use. Sure beats making a gap connector out of twisted wire. I ended up taking the metal plate out of 1 insulator, installed the plate in another insulator so it ended up having 2 swivel metal plates (aka gap connectors). Then I was able to attach the metal wire fencing to one of the metal connectors to end that run of fencing. And connect the gap to the second metal plate. Now there’s no need for a jump wire to connect the fence to the gap. I just installed these, so time will tell if they are worth the price based on how long they hold up to the weather and naughty horses.
Jackie G
Good quality, easy to use. I like being able to feed the gate power from the latch rather than the “hinge”. Much safer for kids and horses.