Udderly EZ™ Milker
Product Details
Hand-powered sheep and goat milking machine makes lambing and kidding season easier on your hands and the teats of your ewes and does.
A few pumps creates a seal allowing the teat valve to open and release milk. The flow is not rapid, but effective.
Speed-up and simplify the collection of:
- Colostrum for newborn lambs and goat kids
- Excess milk from ewes or does for freezer storage
- Milk for your family’s use, reduce strain on your hands!
Designed with input from shepherds, herdsmen, veterinarians and farm managers from around the world.
Instructions/Diagrams:
Udderly EZ™ Milker Instructions 
Common Uses
Specs
Milker Kit includes:
- Udderly EZ™ Pump
- 8 oz Bottles (2)
- 16 oz Bottle
- Bottle Nipple (color may vary). This teat fits right on the Udderly EZ bottle of your choice. No more having to milk in one bottle and then transferring the milk or colostrum to another bottle for feeding. What this means is no more cross contamination from bottles.
- Small Silicone Insert (green) with #2 Extraction Tube
- Medium Silicone Insert (blue) with #2 Extraction Tube
- Teat Wipes
- Towel, microfiber
Tips
How to Use
- Always, clean the udder area, using the Udderly EZ Wipes provided in your kit, to remove any accumulated dirt and bacteria.
- Gently remove the wax plug from the end of the teat so it does not drop into the bottle.
- Manually strip each teat at least twice to get a good flow of milk started. Dampen each teat or use bag balm to help secure vacuum.
- Place the cylinder directly over the teat and gently lift the pump unit against the udder.
- Squeeze the handle at least 2-3 times, this will start the vacuum seal process, locking the unit onto the animal's udder. You may want to hold bottle with free hand and tilt inward or towards the top of the pump until sealed.
- As soon as the milk flow starts, stop pumping! When the flow slows or stops, start pumping again. You may need to repeat this sequence 3-4 times.
- To release the vacuum on the pump, push bottle backwards toward hand trigger to release vacuum lock. Do not pull pump off udder.
- The first milking will generally collect between 8-12 ounces of colostrum, although this may vary with each animal species or breed.
- If the mother does not let her milk down immediately, you may have to massage her udder gently to get the flow started. Push the entire pump and bottle up into the bag (like a baby bunting it's mom while nursing) and let the weight settle back down and be careful not to break the vacuum seal.
- Do not overfill the collection bottle, only fill to the indicated line on the bottle. Never tilt pump backwards. This will allow the milk or colostrum to run into the air intake hole and damage the diaphragm in the pump.
- Place the nipple directly onto the bottle and feed directly to the newborn. All our bottles are Freezer safe, just apply cap and place in freezer. DO NOT THAW OUT IN MICROWAVE!
Precautions
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Lambing and Kidding Aids
32 oz Bottles (quart), 2 pack
Item #556112 -Hand-powered sheep and goat milking machine for obtaining colostrum or milk from ewes and does.
$16.00 -
Top
8 oz Bottles, 2 pack
Item #556121 -Replacement parts and components for the Udderly EZ™ Milker.
$11.00 -
Top
16 oz Bottles (pint), 2 pack
Item #556114 -Replacement parts and components for the Udderly EZ™ Milker.
$11.00 -
Milking and Trimming Stands
Milking Stand with Polled Headpiece and Stationary Tray
Item #819625 -Milk stanchion for dairies and small hobby farms. Headpieces (horned or polled) securely hold goats for milking. Converts easily to a trimming stand.
$356.00 -
Buckets and Troughs
Stainless Steel Bucket, 1.45 gallon
Item #564200 -Durable stainless steel buckets for a multitude of uses on the farm or ranch. An easy to clean option for small-scale milking.
$20.00 -
Feeding Orphan Lambs and Kids
Silicone Bottle Brush
Item #950095 -Use this flexible and hygienic silicone brush to clean lamb and kid feeding bottles, canning jars and water bottles.
$13.00
-
$9.60
-
Top
16 oz Bottles (pint), 2 pack
Item #556114 -Replacement parts and components for the Udderly EZ™ Milker.
$11.00 -
Top
Small Silicone Insert (for Pygmy & Shetlands), green
Item #556115 -Replacement parts and components for the Udderly EZ™ Milker.
$23.45 -
Top
Medium Silicone Insert (for sheep & goats), blue
Item #556116 -Replacement parts and components for the Udderly EZ™ Milker.
$23.45 -
Top
Red Rubber Valve, each
Item #556117 -Replacement parts and components for the Udderly EZ™ Milker.
$3.15 -
Top
Extraction Tube, #2 large
Item #556120 -Replacement parts and components for the Udderly EZ™ Milker.
$16.00 -
Top
8 oz Bottles, 2 pack
Item #556121 -Replacement parts and components for the Udderly EZ™ Milker.
$11.00 -
Top
Pump Repair Kit - Includes: Bottle Connector, Handle, Rubber Valves (2) and O-Rings (2)
Item #556122 -Replacement parts and components for the Udderly EZ™ Milker.
$28.00 -
$3.60
-
Top
Replacement Bottle Nipple
Item #556124 -Replacement parts and components for the Udderly EZ™ Milker.
$3.30
Write a Review
You must be logged in to leave a review. Please sign in.
Jane M from Oregon
Very handy teats.
Fran W from New York
Works very well. Just the ticket to harvest colostrum.
Tricia C from Kansas
Super easy to use on my Polypay ewes. Beats hand milking, hands down. One factor that made it easy was the head gate the ewe was in.
I know other owners and they've had problems with the tabs breaking off. So we'll see about reliability over time. It's really important to take the milking assembly off before you put on or take off the bottle.
Marble M from Vermont
The video was just a promotional video without directions, but reading the enclosed information is helpful. Definitely, bag balm should be used around the top of the insert.
Some of my ewes are easier to milk than others. If you have regular size sheep, you will need the largest instert.
Joyce H from Maine
Long review...I hope it is allowed.
I recently purchased this unit to use with my Nigerian Dwarf goats. I called to ask about the best size for my smaller goats, speaking to their smaller body and teat size.
The accompanying DVD and instructions get low marks. The DVD is more about selling the unit, not instructional. The portion of the DVD that could have been the most instructional was awkward at best. The woman was using the Udderly EZ for every day milking, not just collecting colostrum. There was so much background noise (bird??) that she was hard to hear and whoever took the video did a poor job of showing the best views. Often, the woman in the video was blocking the view. But...no problem...I figured out how the unit went together and also how to use it. Farm folks are like that.
While this unit did in fact work, it did not milk out completely. I guessed that the issue was that I was new at it and needed to give it several days use and with several goats. Still...not so good. I always had to finish the job by hand. And because the unit does one teat at a time, the goats were on the stand a long time...not favorable. Buying two units was just cost prohibitive. These are expensive for a lot of plastic!! Just way over priced.
My second problem with the design is that the unit takes up a lot of room under a dwarf size goat. Add the bottle to the bottom and no room! I tried tilting the unit but going too far would make the seal give way. The only bottle that worked was the smallest 8 oz. bottle. But...even my smallest goats have about 32 oz. of milk (my best milker, double that, but she's a bit bigger and I won't factor her in). This meant that to use the best sized bottle, I had to keep taking the unit off to pour out what had been collected. So...great idea indeed, but the design is simply not suited for smaller goats. Maybe someone else would have better luck, but I say, if you have smaller goats, don't try this.
A portion of the Udderly-EZ promotional include that this is ideal for those milking many goats (but not so many to upgrade to a professional compressor model) and getting tired hands. I have a small goat dairy and thought it would be ideal. I don't believe the promotional to be true.
To make matters worse, when I went to return the unit (and the 2 quart bottles - NEVER EVEN USED), I was never told that they charge a $15 fee for each return and they don't pay return shipping. Was that in print somewhere? So I paid a high price for an item that did not work for my circumstance and then had to pay $30 fee ($15 for the unit and $15 for the 2 extra bottles) and about $10+/- shipping.
I have spent hundreds of dollars for farm equipment from Premier 1 company (mostly in fencing) and have been very pleased, so it saddens me to give such a low rating on this product and the accompanying service.
We’ve wrestled with raising prices to offer free shipping both ways. So far, we’ve not been able to make the math work for everyone. We realize some folks prefer free shipping both ways. But others would rather have lower item prices and pay shipping separately. We're trying to find the right balance between both groups.
We don’t charge a restocking fee for any item when it is returned in sellable condition within 30 days. If we’ve charged you incorrectly, please contact us.
