Speedrite 18000i Energizer
- Peak output: 18.00 joules
- Pulses per minute: 25/40
- 12v DC draw: 1400 mA
- Impedance type: low
- Includes: 12v leads & 110v adaptor
- Input: Both (AC/DC) 110v plug-in or 12v battery.
- Low Energy Terminal. Limits energy to below 1.5 J for use around buildings and houses.
- Remote capable (remote sold separately #133510). Using a Speedrite fence remote (with remote capable Speedrite energizers enables you to switch the energizer on or off from anywhere along the fence line. This makes it easy to manage repairs and maintenance.
- LCD voltage display. Displays output voltage, battery voltage and earth voltage. LCD is backlit for viewing in poor light conditions.
- Indicator lights (voltage and battery). Easy to read light bar display provides an instant measure of the Unigizer output voltage and battery condition for quick fence diagnostics. The LED display shows red when heavily loaded.
- Battery saver. Microprocessor technology automatically adjusts the output energy depending on the battery condition. This feature extends battery life and is particularly efficient when used in solar installations.
- Day/Night sensor. Automatically adjusts pulse speed to contain or exclude animals based on day or night conditions.
- Large terminals. Mounted on the front of the energizer casing for convenience, these large terminals are easily adjusted and accept up to two fence wires. The slotted terminals make inserting wires and getting a good connection easy.
- Earth monitoring. Indicates earth system problems by monitoring the level of voltage around the earth system.
- Versatile mounting options. Can be mounted on a wall, post or fence wire. Choose indoor or outdoor installation, depending on your fence location and power supply.
- Versatile power options. Can be used in mains, battery or solar power applications, providing convenient, versatile livestock control.
- Adjustable output power and pulse speeds.
- Two year warranty.
- Warning: Powerful high joule unit. Use with caution. Do not use with fences near children, visitors or the public.
- When working on the fence, make sure the energizer is unplugged before working on the fence or the energizer.
- Remote sold separately.
To Reduce Risk & Liability
- Never place your head or upper spine near an electrified wire. Accidental head or neck contact can occur when pushing a voltage probe into the soil. Be careful when doing so to avoid head-to-wire contact!
- Never attempt to step over or climb through an energized fence of any kind.
- Never encourage anyone to touch an electric fence.
- Test the energizer first.
- Turn off energizer.
- Disconnect ground wire and the fence wire.
- Turn energizer back on.
- With fence tester, put the ground probe (or clamp) to the ground terminal on the energizer and the metal loop (or positive clamp) at the top of the tester to the fence/positive terminal. The reading you get tells you how well the energizer is working without any other variables. If there is a very low voltage (under 4000v) or no voltage, then the energizer may have a problem. If the voltage is high (greater than 4000v) then the trouble lies with your fence. Most energizers put out between 5000v and 8000v when there is no load (i.e. no fence hooked up).
- If the energizer is faulty and it is a 110 volt plug-in unit…
- Check that the 110v outlet is "live" by using a plug-in drill or test light.
- If the test light works and the energizer does not, call Premier.
- If the fence is at fault, then you must find the fault(s) and fix them.
- If you lack a Fault Finder…
- Walk or drive along the fence looking for any point in which the energized wires touch the soil, a steel post or a steel wire. On HT wire fences, check the wires at braces to see if they are touching a hot wire. On netting, look for a hot wire touching the metal stake at the bottom of the plastic posts. Also look for damaged insulators.
- If the fence can be separated into several parts (by switches or by disconnecting parts of it), you can locate the problem by beginning at the far end and then progressively turn off or disconnect the sections of fence. When the voltage on the remaining fence rises sharply, you've located the section(s) that's causing the problems.
- The alternative to (2.) is to begin at the fencer and progressively turn on sections of the fence. When the voltage suddenly drops you can assume that the problem is in the section most recently connected.
Energizer Solar Panels and AccessoriesItem #133510 -
3 in 1 tester for fence voltage, intensity of current and fault finder. Indicates which direction a fault (leak) in your fence is located.$221.00
Energizer Solar Panels and AccessoriesItem #812929 -
Use with Speedrite 6000, 6000i, 12000i and 18000i units to run on 110v AC power.$36.03
Write a Review
You must be logged in to leave a review. Please sign in.
John C from Iowa
We have the Stafix version (X18i). Same unit I'm pretty sure. Good and powerful. It will burn through nets that are grounding out; the wire and plastic both melt. Look for sparks at night and rectify before it's too late. You can turn the power down if you don't need 9000 volts. The remote is very handy and works well. We like that the unit is 12v natively, you can run it off a deep cycle battery and trickle charge with solar to be offgrid. (also plugs in to 120v ac with a wall wart).