ElectroFence® Gates
Product Details
48" ElectroFence Gates allow for quick access in or out of the paddock. Simply lift the handle, remove the post from the dock and go on through. For a shorter gate, look to 35" ElectroNet gates.
This a complete gate that can be added to the ends of existing nets (or between permanent fences) and electrified. Gate post locks in place via a handle and docking station. Stainless steel clips at each end of the gate provide electrical connections to netting. Gate's drivable posts can be used in hard soils.
Same mesh spacings as ElectroFence but with tighter verticals, 6" instead of 12".
Available as a 7.5 ft walk-through or a 21.5 ft for vehicles and whole flocks.
Instructions/Diagrams:
Replacement Handle Instructions 
Common Uses
Specs
- 48" tall installed.
- 11 horizontals (10 conductive).
- Horizontals are white/black or green/black.
- Black/white gates have black posts and green/black gates have white posts.
- Horizontal spacings from bottom to top are: 4", 4", 4", 4", 4", 4", 6", 6", 6", 6".
- Verticals are white plastic struts placed every 6".
- 7.5 ft and 21.5 ft length options.
- Contains gate, posts, handle & docking station.
- Drivable posts are .75" PVC with a metal spike that goes into the ground.
- 21.5 ft gate contains a center post.
Benefits
Drivable posts—can be inserted into hard soils with a mallet or dead blow hammer.
Two more conductive strands than ElectroNet Gates—better for semi-permanent and perimeter fences, or for fences with high predator pressure.
Installation
If the gate is to be used in the middle of a fence line, and power needs to be carried across, simply use a PowerLink to carry the power over to the continuing section of fence.
Precautions
Warning! Due to risk of fire, do NOT use continuous output energizers with electric netting or electro-plastic conductors such as rope, twine or tape. Use only with a low or wide impedance intermittent pulse energizer. (Fi-Shock™ brand energizers which are sold as low impedance, continuous current output should NOT be used with electric netting.) All energizers sold on Premier’s website use an intermittent pulse and are suitable for use with electric netting.
Dry conditions and wintertime usage may reduce the effectiveness of electric netting. We do not recommend the use of electric netting during harsh winter conditions—ice and heavy snow can flatten netting and thereby damage it.
Dry or frozen ground may cause post spikes to bend or break if inserted with force. Pilot holes may be needed.
Troubleshooting
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Fencing
ElectroFence® Plus 11/48/12 Starter Kit
Item #207031 -Because of its heavy duty posts and spikes, ElectroFence maintains tension better over time than other nets—but it’s still easy to install and remove. 48" tall.
$831.00 -
Fence Connectors and Accessories
PowerLink™ 4.0, 30" long
Item #335500 -Make instant, in-field connections between electric fences without turning off the energizer. Simple to use and effective.
$5.50 -
Fence Connectors and Accessories
Fence & Battery Digital Tester
Item #200010 -All-in-one fence tester checks the voltage of energizers, fences and 12V batteries. Simplify electric fence troubleshooting with one device!
$38.00 -
Fencing
Warning Sign
Item #346000 -Let passersby know that your fences are electrified with this easy-to-read electric fence warning sign.
$2.50
-
Posts and Accessories
NetPost 19/48/DP, white
Item #205012 -19mm (0.60") diameter replacement PVC posts for Premier’s electric netting. Available in multiple heights, colors, and post spike options.
$4.40 -
Posts and Accessories
NetPost 19/48/DP, black
Item #205014 -19mm (0.60") diameter replacement PVC posts for Premier’s electric netting. Available in multiple heights, colors, and post spike options.
$4.40 -
Fencing
Dock (no stakes) for NetGates
Item #340618 -Replacement parts and components for Premier’s ElectroFence®, ElectroNet® and PoultryNet® Gates.
$4.62 -
Fencing
Handle for NetGates
Item #340631 -Replacement parts and components for Premier’s ElectroFence®, ElectroNet® and PoultryNet® Gates.
$4.00 -
Fencing
Stake for NetGate Dock, each
Item #340651 -Replacement parts and components for Premier’s ElectroFence®, ElectroNet® and PoultryNet® Gates.
$2.00
Write a Review
You must be logged in to leave a review. Please sign in.
Vickie P from Missouri
Gate was easy to install and works well. Allows me access to the animals without having to take down fence sections.
Kathleen J from Georgia
I absolutely love this gate system! I bring my two Great Pyrenees out of the fenced enclosure twice a day to feed them. I love how I can just open the gate and have them exit and enter without turning the entire fence on and off. The sheep and goats have learned to stay back because the fence is always hot. It is a great time saver.
Laurie H from Kentucky
We’re using this fence for goats, chickens and dogs. It is worth the money. It keeps what you want in to stay in and the things you want to stay out, it keeps them out! I have already bought more.
Jason F from Virginia
I had my concerns that the gate would sag for some reason, but it didn’t disappoint. It works just as advertised as long as you set it up correctly. Very simple solution and is plenty large enough for a garden tractor to go through.
Nick R from Georgia
This gate was a game changer when getting through the fence to feed and water the animals. The problem is that it is very cheaply built and falls apart within a few months of use. There are a few pieces of plastic that are glued to the removable pile, and the glue is no longer holding those pieces in place. We have to unplug the energizer in order to get through the gate without electrocuting ourselves. This would have been a 5-star review had a written it a few months ago.
