Goat Trace Mineral Premix
New! A complete trace mineral premix for goats. Contains additional copper with no added molybdenum (ties up copper) for better milking production.
- Supplements 10 goats for 1 year
- Mix with 50 lbs of salt
- High levels of zinc and iodine for hoof health, animal growth and reproduction
- Nutritionist formulated to exceed NRC requirements
Add Sheep/Goat Vitamin A/D/E Premix for diets low in fresh forage.
CONTAINS HIGH LEVELS OF COPPER. DO NOT FEED TO SHEEP.
The GOLD Formula difference…
Formulated by Premier’s small ruminant nutritionist, Dr. Dan Morrical, Ph.D., Goat Trace Mineral Premix contains high levels of copper, zinc and iodine to promote healthier hooves and dairy goat milking production. (Hoof growth is a long term process so benefits may not be seen for several months of continuous feeding.)
The key to avoiding copper deficiency is to provide a free choice mineral mix that is properly balanced between copper and molybdenum. (High dietary molybdenum can depress absorption of copper in goats.) Prevention of deficiencies now means fewer animals requiring treatment later on.
- Calcium (Ca), min 3.5%
- Calcium (Ca), max 5.5%
- Sulfur (S), min 11.00%
- Cobalt (Co), min 600 ppm
- Selenium (Se), min 990 ppm
- Iron (Fe), min 1,000 ppm
- Iodine (I), min 6,000 ppm
- Manganese (Mn), min 16,000 ppm
- Copper (Cu), min 50,000 ppm
- Copper (Cu), max 55,000 ppm
- Zinc (Zn), min 245,000 ppm
Ingredients: Zinc Sulfate, Copper Sulfate, Zinc Oxide, Manganese Sulfate, Mineral Oil, Calcium Carbonate, Manganous Oxide, Ethylenediamine Dihydriodide, Sodium Selenite, Ferrous Sulfate, Cobalt Sulfate.
Limestone is used as a carrier for calcium.
How to Use
Thoroughly mix Goat Trace Mineral Premix into 50 lbs of feed mixing salt. Provide in weekly amounts to the goat herd to prevent wastage from weathering.
Goats are expected to consume .25 oz of mixture per head per day. If goats are in confinement, also add 1 lb of Sheep/Goat Vitamin A/D/E Premix. Our research determined that when vitamins are added to a premix, they begin to degrade and lose their effectiveness. The shepherd can slow this break down by keeping vitamins and minerals separate, until they are ready to be fed.
For herds needing calcium and phosphorous, add 20 lbs dicalcium phosphate and 10 lbs of limestone to the 55 lb salt mixture. Intake should increase to .5 oz of mixture per head per day to ensure adequate micro-mineral consumption. If intakes are not adequate, 5% molasses or processed grains can be added to increase palatability.
Always provide a source of fresh, clean water.
Intake above .25 oz per head per day will exceed the allowable FDA intake levels of .69 mg of selenium per head per day. To reduce intake of the trace mineral salt mixture, dilute with more salt and/or move feed locations further from water sources or congregation areas.
Read all warnings and cautions on label. Follow mixing and feeding instructions carefully. For livestock use only.
Write a Review
You must be logged in to leave a review. Please sign in.
Bonnie Y from Ohio
I have just started using this mineral mix so I don't know how well it is going to work for my goats. It wasn't too hard to mix it up by hand but if I keep using it I will probably buy a cement mixer to mix it up. I have about 45 adult goats and we are just getting read to kid on April 3 and 4. I switched to Kiko goats and Kiko crosses but still have some problems with hoof scald due to all the mud we have here in Ohio. I am hoping this mineral will help get rid of the problem in the future.