Heated Poultry Waterer
Product Details
Select project image 2
Select project image 3
Select project image 4
Select project image 5
Select project image 6
Select project image 7
Select project image 8
Select project image 9
Select project image 10
Select project image 11
Select project image 12
Select project image 13
Select project image 14
Select project image 15
Select project image 16
Provides clean, unfrozen water to the flock year-round. Internal heater keeps water flowing in temperatures as low as -20°F. Detachable cord for non-winter use.
Benefits:
- 3 gallon capacity
- Secure, interlocking lid
- Heavy-duty handle for carrying and hanging
- 3 recessed drip-catch nipples
- Improved! Hinged quick-fill cap is just the right size for a garden hose. Refill without removing the lid!
Perfect for Novice Poultry Keepers
Premier’s Heated Waterer Kit bundles everything you need to keep fresh water available for your birds and off the coop floor.
Instructions/Diagrams:
Waterer Comparison Chart 
Benefits
- Lid is secured to the base via unique interlocking tabs
- Conical lid shape to prevent birds from perching and soiling waterer
- Insulated lid traps warmer air inside waterer
- Handle can be used for both carrying and hanging
- Detachable 16' electrical cord for more flexibility without using extension cords. If you must use an extension cord, use a heavy-duty outdoor extension cord that is rated for a minimum of 1 amp (100 watts) continuous draw.
- Built-in thermostat turns heating element on at 40°F and off at 60°F. Note: Water in the basin does NOT get hot, nor even warm. Rather, the thermostat keeps the water from freezing.
- BPA free plastic
- Ducks can drink from this waterer, though we periodically offer water in a rubber pan so they can submerge their heads
Refill without removing the lid!
Customers love our Heated Poultry Waterer, but they don’t love fiddling with the lid when it’s really cold. (We don’t either!)So we’ve added a hinged quick-fill cap. It’s just the right size for a garden hose or watering can. With a glance you can also check the water level. Quick-fill lid fits all Heated Poultry Waterers sold since 2019.
For folks that don’t need to worry about frozen water, look to the 3-Season Poultry Waterer. It’s a reliable top-fill waterer with many of the best-in-class features found in our heated version.
Specs
- Capacity: 3 gal (12 qt)
- Bucket dimensions: 9"H, 13"Dia
- Overall height: 14"H
- Suited for: Up to 35 adult birds
- 100-watt heater
- 110V detachable 16 ft grounded electrical cord
- (3) replacement nipples included. Additional drip-catch nipples can be purchased separately.
- Quick-fill opening in lid measures 2" wide narrowing to 1.375"
- Add a hanging scale for quickly checking the water level
Note: The exact number of birds to water is difficult to determine as there are many factors that influence intake; salt and protein levels in the diet, humidity, temperature, productivity (growth or egg production) and the birds ability to process feed and water.
How to Use
The detachable cord can be stowed separately during warmer months.
The electrical plug cap (used during summer months) fits over a nub on the bottom of the bucket.
Nipples should be placed just above the birds’ heads. The birds should stretch up slightly to drink.
A few tricks for dealing with stubborn birds:
- Remove all other sources of water. Place the new nipple waterer in the old waterer’s location.
- Bring a bird’s beak directly to the nipple waterer and flick the nipple. You may have to activate the nipple with the bird’s beak to demonstrate the new water source. (See video above.)
- Place a sunflower seed in the drip trough. When the bird pecks at the seed, it will discover the new water source.
- Use a red laser pointer to direct chickens to the nipple. Similar to house cats, our chickens will chase and follow the red light. (This was inadvertently discovered by our photo dept and is now our go-to method for getting camera-shy birds to cooperate.)
You don’t have to train every bird in the flock. Just a few will do. Once the first chickens begin drinking, others will follow.
Precautions
Warning: Risk of electrical shock—Connect only to a branch circuit protected by a ground-fault circuit-interrupter (GFCI). Contact a qualified electrician if you cannot verify that the circuit is protected by a GFCI.
Troubleshooting
Not all of the water from the drinker will end up in the bird. Chickens are messy drinkers. Bored chickens may also peck at the nipple even when not seeking water. Over time, this may result in moisture build-up under the nipple. In freezing coops, icicles may form. As long as the water at the nipple remains unfrozen, birds will have a source of water.
Replacement cords must be matched to the type of receptacle found on the base of the bucket. They are NOT interchangeable.
When connecting the detachable cord to the base, make sure the alignment notch slides easily into the groove on the bucket’s receptacle. (See photo below.) Unfortunately, it’s easier than we’d like to misalign the prongs. The result is a non-functioning unit until it’s aligned correctly.
Warranty
-
Waterers and Accessories
Heated Poultry Waterer Kit
Item #5300227 -All-season chicken waterer system that enables you monitor water levels and keep drips in check, even in the winter.
$75.00 -
Waterers and Accessories
Horizontal Nipple – Red, each
Item #530024 -Water nipples for chickens, ducks and other poultry. Side-facing with drip-catch design to reduce moisture build-up in the coop.
$1.20 -
Waterers and Accessories
Hanging Scale
Item #887501 -Analog hanging scale. 50 lb capacity. Easy-to-read gauge indicates reservoir level of Premier’s Heated Poultry Waterer.
$4.20 -
Wire Panels and Accessories
3/16" dia. Braided Cord, 8 ft
Item #965410 -Braided nylon cord for general utility around the farm. Hang poultry waterers and feeders. Attach wire panels and gates.
$1.50 -
Handling Equipment
Snap Clip, Zinc Plated
Item #965405 -Use to connect wire panels and hang poultry waterers and feeders.
$2.25 -
Waterers, De-icers and Heated Buckets
25' Heavy Duty Extension Cord (15 amp)
Item #557400 -25 ft. heavy duty extension cord for indoor/outdoor use. Extend power to livestock tanks or carbon fiber heaters on the farm. 15 amp draw rating (1875 watts).
$44.00 -
Waterers and Accessories
FlockLeader™ Thrive™, 8 oz
Item #540331 -Research-backed backyard poultry supplements for daily maintenance to whole flock rejuvenation. Probiotics are tailored to each flock.
$16.00 -
Waterers and Accessories
Nutri-Drench for Poultry, 1 qt
Item #620501 -A natural source of energy and nutrients. Produces healthier, more productive chickens, turkeys, ducks and guineas.
$32.50
-
Waterers, De-icers and Heated Buckets
Replacement Lid with Quick-fill Cap
Item #530025 -Reliable heated poultry waterer for all seasons. Top-fill design with dense lid insulation prevents heat escape. 3 gallon capacity.
$18.00 -
Waterers and Accessories
Horizontal Nipple – Red, each
Item #530024 -Water nipples for chickens, ducks and other poultry. Side-facing with drip-catch design to reduce moisture build-up in the coop.
$1.20 -
Waterers and Accessories
Replacement Cord - Type A (for units sold before Dec 2021)
Item #5300222 -Detachable 16 ft grounded electrical cord for Premier’s Heated Poultry Waterer. 110V.
$15.21 -
Waterers and Accessories
Replacement Cord - Type B (for units sold after Dec 2021)
Item #5300225 -Detachable 16 ft grounded electrical cord for Premier’s Heated Poultry Waterer. 110V.
$15.21 -
Waterers and Accessories
Replacement Plug Cover - Type B (for units sold after Dec 2021)
Item #5300226 -Detachable 16 ft grounded electrical cord for Premier’s Heated Poultry Waterer. 110V.
$3.62
Write a Review
You must be logged in to leave a review. Please sign in.
Adam M from North Dakota
Excellent construction and use of materials. Durable and stout. Cord is excellent long length and nice that its removable. Thanks for the extra nipples. Took the chickens almost a week to figure it out and get sufficient water. Works well now that all the chickens have learned.
Lisa G from New Jersey
Very nice waterer. I'm very happy to have a high quality heated waterer that hangs. Lid fits very securely. Hens took to it right away.
Ruth B from Colorado
I have mixed feelings about this waterer ... let me explain:
1) The lid is almost impossible to get off. I am going out of town next week and I’m going to put my old electric waterer in the run along with this one in case the girl who is taking care of the chickens can’t get the top off this waterer to refill it. If I try to wrench the top off by setting the waterer on the ground it’s almost impossible. However, if I take the waterer all the way back to the house and set it on the counter I can “hug” the waterer with enough strength to twist the top off. But then I’m covered in dust from the waterer. Sigh. This is my biggest complaint.
2) The blue plastic is very sturdy BUT you can’t see the water level through the plastic. So this afternoon I couldn’t tell if it was “heavy” enough to have enough water to wait one more day. I miss being able to glance at the old waterer and “see” what the water level is through the white plastic. The whole point of a larger waterer is to go longer between fills but if I’m unsure what the level is I fill it proactively to be sure. And then I’m filling just as often as the old two gallon waterer. Oh well.
3) It’s 3 gallons which is one more gallon than my old one but it seems to empty faster so there’s no gain. I’m not sure why.
4) This waterer is VERY WELL MADE. It’s a Cadillac of construction. The cord is blessedly long. So I have no complaints about the quality of construction.
NOW ... these are the changes I’d make if I were in charge: a) I’d put a handle on the side of the waterer to hold onto in order to gain leverage to twist off the top. b) I’d put some sort of viewing window in the side to see the water level. Or as my husband said drill a small hole in the top and put a metal rod with a cork in the water, through the hole in the top, and as the water level goes down the metal rod attached to the cork would lower. In fact, that’s what he’s going to do to my waterer, as well as slightly shave down the tabs on the top so they slide a little easier to unscrew the top. Anyway, this is my honest review having the new waterer for two weeks. I’d recommend this WITH these comments so you know what you’re getting into.
We’ve also noticed on very cold days and clear nights that a frost-ring may develop between the lid and the bucket making the lid difficult to remove. One solution is to gently tap the waterer on the ground to dislodge the frost ring before opening. (The result is similar to flexing an ice-cube tray.)
As a possible remedy to tight lids, another customer suggested applying Vaseline to the bucket lip where it comes in contact with the lid. We haven’t tried this ourselves, but will, and report back.
Robert P from Vermont
Very high quality. Much better than what we had been using. Easy to transport.
Deborah G from Maryland
A great solution. At 100 watts I think it will be cost effective especially if it will work on a timer.
Chickens are adapting pretty good but prefer to drink from it without it moving. I was hanging it with a scale so I could easily watch water consumption. But I might have to change it.
