Jet/Ovina Premium Cutter & Comb Set
Use the Ovina Premium, which features LG2 technology, with the Jet cutter for your all purpose shearing needs.
Instructions/Diagrams:
Common Uses
- Sheep
Specs
- 13 tooth
- 3.3-3.4mm thick
- Full thickness
- 77mm wide / medium bevel
- Features LG2 technology
- 4.4mm thick
Made in Switzerland
Troubleshooting
- the comb and cutter are installed as described in the instructions
- the comb name can be read on outside when placed on head
- to have 1/8" space from end of comb (bevel) to tip of cutter
- the edge of the cutter does not go over the side of the comb
- the tension is set correctly
Precautions
Proper Storage
- Remove blades/combs/cutters from clipper or shearing machine.
- Clean blades/combs/cutters immediately after use by using a small brush or blowing off any excess dirt or hair. Cover with oil to reduce risk of rust. High carbon steel clipper blades will rust overnight. Rust will destroy both the edge and polished surface of blades.
- Store clipper/shearer and blades away from solvents, chemicals and moisture. Never leave them where they can be damaged by accidental impact.
Sharpening and Cleaning
- Premier offers an in-house resharpening service for all combs, cutters and blades. Rapid turnaround—most are sharpened within 24 hours.
- To reproduce the quality of the cutting edge on the clipper blades that came from the factory, a lapping machine must be used. Most other methods are, in our experience, inferior. In addition to producing a cutting edge that won’t last, some methods can permanently damage blades. The most common “culprit” is using large high speed grinding wheels that are used to sharpen cutters and combs.
Warning: Clipper blades/cutters/combs that have been sharpened by inferior methods or inexperienced people may be damaged to such an extent that they can never be restored to a satisfactory cutting capability. The same is true of blades that have become too heavily pitted by rust.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Questions? Please call and talk to our consultants at 800-282-6631.
-
Clipping and Shearing Machines
Heiniger Xpert Shearing Machine Kit
Item #830615 -Two-speed shearing machine ideal for sheep, cattle and show animal fitting. Lightweight, slim and agile for hard-to-shear areas.
$489.00 -
Clipping and Shearing Machines
Heiniger XTRA Shearing Machine Kit
Item #830753 -Proven sheep shearing machine trusted by shepherds all over the world. Perfect for dagging, belly clipping or light shearing.
$575.00 -
Professional Shears
ICON Cyclone Handpiece, pin drive
Item #830401 -High performance ICON handpiece fits EVO and ONE professional shearing systems. Available in pin or worm drive configurations.
$531.00 -
Professional Shears
ICON FX Handpiece, pin drive
Item #830636 -Ergonomic ICON FX handpiece offers a superb grip, superior balance and maneuverability. Fits EVO and ONE professional shearing systems.
$524.00 -
Professional Shears
#10 White Clipping Oil, 8 oz bottle
Item #258300 -A high-quality clear clipping and shearing oil to lubricate blades, combs and cutters. Reduces risk of stain to wool fibers and hair.
$4.20 -
Accessories
Comb Screwdriver
Item #824600 -For securing combs to shearing machines. Provides more leverage than a normal screwdriver and fits comb screws on all major shearing units.
$3.00 -
Accessories
Premier Comb/Cutter Box
Item #824606 -Use this handy box to keep expensive combs and cutters organized, clean, safe and lubricated.
$3.20 -
Resharpening Service
Resharpen - COMB (each)
Item #870000 -Resharpen your blades, combs or cutters. Rapid turnaround, precision finish, low cost! Custom-engraving available.
$2.00
Write a Review
You must be logged in to leave a review. Please sign in.
Christopher B from Ohio
Were dull after 4 sheep. The medium blades I bought previously were dull after 3. I have used other shears and cutters, etc. and had better success. Ceramic cutter works good.