B-Evil Shearing Comb
Product Details
Medium bevel comb from HEINIGER for shearing merino and crossbred sheep. Run-in design and 94.5mm wide for versatility and efficiency. Uses LG2 technology to prevent getting bogged down in sticky fleece.
Instructions/Diagrams:
Common Uses
- Sheep
Benefits
Run-in combs are thin combs. They’re the same design (width, teeth, layout) as full thickness combs, just thinner out of the box. A thin comb runs better in sticky (heavy lanolin) sheep and on lambs. A standard thickness comb becomes a run-in comb as it gets thinner from resharpening.
Specs
- 13 tooth
- Run-in, 3.05-3.1mm thick
- 94.5mm wide / BAT bevel
- LG2 grooves on either side of the comb
- Made in Switzerland
Troubleshooting
- the comb and cutter are installed as described in the instructions
- the comb name can be read on outside when placed on head
- to have 1/8" space from end of comb (bevel) to tip of cutter
- the edge of the cutter does not go over the side of the comb
- the tension is set correctly
Precautions
Proper Storage
- Remove blades/combs/cutters from clipper or shearing machine.
- Clean blades/combs/cutters immediately after use by using a small brush or blowing off any excess dirt or hair. Cover with oil to reduce risk of rust. High carbon steel clipper blades will rust overnight. Rust will destroy both the edge and polished surface of blades.
- Store clipper/shearer and blades away from solvents, chemicals and moisture. Never leave them where they can be damaged by accidental impact.
Sharpening and Cleaning
- Premier offers an in-house resharpening service for all combs, cutters and blades. Rapid turnaround—most are sharpened within 24 hours.
- To reproduce the quality of the cutting edge on the clipper blades that came from the factory, a lapping machine must be used. Most other methods are, in our experience, inferior. In addition to producing a cutting edge that won’t last, some methods can permanently damage blades. The most common “culprit” is using large high speed grinding wheels that are used to sharpen cutters and combs.
Warning: Clipper blades/cutters/combs that have been sharpened by inferior methods or inexperienced people may be damaged to such an extent that they can never be restored to a satisfactory cutting capability. The same is true of blades that have become too heavily pitted by rust.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Questions? Please call and talk to our consultants at 800-282-6631.
-
Professional Shears
#10 White Clipping Oil, 8 oz bottle
Item #258300 -A high-quality clear clipping and shearing oil to lubricate blades, combs and cutters. Reduces risk of stain to wool fibers and hair.
$4.20 -
Professional Shears
Heiniger Storm Shearing Cutter, each
Item #850030 -Ultra-thick cutter (4.6mm) runs evenly across the comb. Recommended for use with winter and cover shearing combs. Made in Switzerland by Heiniger.
$7.00 -
Professional Shears
Spitfire Cutter
Item #850000 -Standard 4 point cutter for shearing machines. Works well with Premiers combs and shearing heads.
$7.00 -
Combs and Cutters - Large
Comb Lifter
Item #862700 -Leaves a layer up to 0.75" of uncut fiber on camelids, goats and other hair species.
$5.00 -
Combs and Cutters - Large
Ceramic Cutter
Item #850040 -Holds cutting edge up to 3 times as long as normal shearing cutters. Ideal for tough fiber and wool.
$16.00 -
Accessories
Comb Screwdriver
Item #824600 -For securing combs to shearing machines. Provides more leverage than a normal screwdriver and fits comb screws on all major shearing units.
$3.00 -
Resharpening Service
Resharpen - COMB (each)
Item #870000 -Resharpen your blades, combs or cutters. Rapid turnaround, precision finish, low cost! Custom-engraving available.
$2.00
Write a Review
You must be logged in to leave a review. Please sign in.