Storm Shearing Cutter
Ultra-thick cutter (4.6mm) from HEINIGER runs evenly across winter and cover combs.
See our comparison chart for choosing the right cutter and comb for each situation.
Instructions/Diagrams:
Specs
Specs
- 4.6mm thick
- Made in Switzerland
Troubleshooting
- the comb and cutter are installed as described in the instructions
- the comb name can be read on outside when placed on head
- to have 1/8" space from end of comb (bevel) to tip of cutter
- the edge of the cutter does not go over the side of the comb
- the tension is set correctly
Precautions
Proper Storage
- Remove blades/combs/cutters from clipper or shearing machine.
- Clean blades/combs/cutters immediately after use by using a small brush or blowing off any excess dirt or hair. Cover with oil to reduce risk of rust. High carbon steel clipper blades will rust overnight. Rust will destroy both the edge and polished surface of blades.
- Store clipper/shearer and blades away from solvents, chemicals and moisture. Never leave them where they can be damaged by accidental impact.
Sharpening and Cleaning
- Premier offers an in-house resharpening service for all combs, cutters and blades. Rapid turnaround—most are sharpened within 24 hours.
- To reproduce the quality of the cutting edge on the clipper blades that came from the factory, a lapping machine must be used. Most other methods are, in our experience, inferior. In addition to producing a cutting edge that won’t last, some methods can permanently damage blades. The most common “culprit” is using large high speed grinding wheels that are used to sharpen cutters and combs.
Warning: Clipper blades/cutters/combs that have been sharpened by inferior methods or inexperienced people may be damaged to such an extent that they can never be restored to a satisfactory cutting capability. The same is true of blades that have become too heavily pitted by rust.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Questions? Please call and talk to our consultants at 800-282-6631.
-
Professional Shears
Apache Shearing Comb
Item #862000 -For shearing range ewes, feeder lambs and winter farm flocks.
$28.00 -
Professional Shears
#10 White Clipping Oil, 8 oz bottle
Item #258300 -A high-quality clear clipping and shearing oil to lubricate blades, combs and cutters. Reduces risk of stain to wool fibers and hair.
$4.20 -
Professional Shears
#10 White Clipping Oil, 1/2 gal. jug
Item #258400 -A high-quality clear clipping and shearing oil to lubricate blades, combs and cutters. Reduces risk of stain to wool fibers and hair.
$20.25 -
Resharpening Service
Resharpen - CUTTER (each)
Item #869000 -Resharpen your blades, combs or cutters. Rapid turnaround, precision finish, low cost! Custom-engraving available.
$1.50
Write a Review
You must be logged in to leave a review. Please sign in.
Craig J from Ohio
I have not found anything to beat these cutters.
Jodi F from North Carolina
Execellent quality and excellent cut! It works perfectly on my sheep and llamas! Will continue to purchase in the future.
Frank V from Iowa
Great shearing cutter!
Mark J from New Mexico
The cutter is awesome. Cuts right through tough Alpaca fleece filled with lots of debris. However, I can only get through 2 to 2.5 Alpaca before they go dull.
James G from Montana
Best cutter for Apache comb, likely with other 9-tooth combs as well. Outperforms other cutters in this combination. I’ve been a customer for nearly 20 years; always satisfied with Premier 1 products and their customer service.