LAC-TEK II Milk Feeding System
Product Details
The LAC-TEK II Milk Feeding System is a heavy-duty automatic milk feeder for up to 120 orphan lambs and goat kids. Designed to provide a constant, uniform and easily accessible supply of milk replacer or formula for large flocks/herds.
Look to the Förster Technik® ECO Lamb Feeder as an alternative. —Premier
Instructions/Diagrams:
Benefits
- Provides milk for up to 120 orphans
- Produces very uniform lambs/kids at weaning
- Mix only what you need—less spoilage
- Built-in thermostat warms water to a preset temperature, up to 110°
- Adjustable milk/water ratio for desired concentration as animals age
- Daily cleaning takes about 10 minutes
- When used on our farm, nipples lasted for 100 lambs
- 6-month manufacturer’s warranty
Specs
- Dimensions: 20" x 22" x 30"
- 6 lamb/kid nipples. Note: Add in hose splitters (not included) to accommodate up to 12 nipples to feed more lambs.
- 6 nipple connectors
- 18 feet of nipple tubing
- 3 nipple panels—up to 6 nipple panels can be used with this unit. Additional nipple panels available under the "Replacement Parts" tab
- 2.5 gallon reservoir (for warming water)
- 50 lb capacity stainless steel hopper for milk powder
- Rating: 110 volts, 1500 watts
- Operating manual
How to Use
Nipples are not pre-slit. Hole size depends on the age and vitality of the lambs. To make the hole, start small (14 gauge needle or pinch the end and put a small slit in the end with a pair of scissors) then enlarge if needed if the lambs struggle to get milk flow. Too large of a hole and there is a risk of the lamb breathing in the milk.
Precautions
- Nipples must be set 1" above the level of the milk in the mixing bowl.
- If mixed milk has cooled lambs won’t be eager to consume cold milk. Not a problem unless only 1-2 lambs/kids.
- Spoilage can occur in warm weather.
- Warm temperatures may cause milk to froth which covers the sensor. This delays the mixing of a fresh batch.
- Must be kept from freezing. Some build an insulated box and/or install a heat lamp.
- Requires a 20 amp breaker.
Warranty
-
Feeding Orphan Lambs and Kids
Shepherd's Choice® Lamb & Kid Milk, 8 lbs
Item #780001 -Veterinary-formulated milk replacer that provides total nutritional requirements for baby lambs and goat kids.
$29.00 -
Feeding Orphan Lambs and Kids
Shepherd's Choice® Lamb & Kid Milk, 25 lbs
Item #780002 -Veterinary-formulated milk replacer that provides total nutritional requirements for baby lambs and goat kids.
$72.00 -
Feeding Orphan Lambs and Kids
Shepherd's Choice® Lamb & Kid Milk, 45 lbs
Item #780003 -Veterinary-formulated milk replacer that provides total nutritional requirements for baby lambs and goat kids.
$123.00 -
Feeding Orphan Lambs and Kids
Shepherd's Choice® Kid Milk, 8 lbs
Item #780000 -Veterinary-formulated milk replacer with citristim that provides total nutritional requirements for goat kids. 50 lb bag.
$29.00 -
Feeding Orphan Lambs and Kids
Shepherd's Choice® Kid Milk, 45 lb bag
Item #780004 -Veterinary-formulated milk replacer with citristim that provides total nutritional requirements for goat kids. 50 lb bag.
$123.00 -
Handling Equipment
PrimaGate™ 2, 4 ft
Item #913701 -Sturdy, heavy duty panels for containing and controlling small livestock such as sheep and goats. Modular design for customized lengths.
$130.00 -
Handling Equipment
PrimaGate™ 2 Extension, 2 ft
Item #913711 -Sturdy, heavy duty panels for containing and controlling small livestock such as sheep and goats. Modular design for customized lengths.
$61.00 -
Handling Equipment
36" x 36" PowerBilt Wire Panel, 3" holes
Item #965500 -Reinforced galvanized welded wire panels. Great for building lambing jugs, gates, fence lines and many other projects.
$46.00 -
Handling Equipment
36" x 48" PowerBilt Wire Panel, 3" holes
Item #965550 -Reinforced galvanized welded wire panels. Great for building lambing jugs, gates, fence lines and many other projects.
$56.00 -
Handling Equipment
36" x 60" PowerBilt Wire Panel, 3" holes
Item #965600 -Reinforced galvanized welded wire panels. Great for building lambing jugs, gates, fence lines and many other projects.
$64.00 -
Handling Equipment
48" x 48" PowerBilt Wire Panel, 3" holes
Item #965700 -Reinforced galvanized welded wire panels. Great for building lambing jugs, gates, fence lines and many other projects.
$72.00 -
Handling Equipment
48" x 72" PowerBilt Wire Panel, 3" holes
Item #965800 -Reinforced galvanized welded wire panels. Great for building lambing jugs, gates, fence lines and many other projects.
$82.00 -
Handling Equipment
48" x 96" PowerBilt Wire Panel, 3" holes
Item #965900 -Reinforced galvanized welded wire panels. Great for building lambing jugs, gates, fence lines and many other projects.
$109.00 -
Handling Equipment
40" x 48" Welded Wire Panel, 4" holes
Item #964700 -Sturdy, hot-dip galvanized wire panels are great for lambing and kidding pens, gates, fence lines and many other projects. 1/4 in. dia. rods. 4"x4" spacings.
$50.00 -
Handling Equipment
40" x 60" Welded Wire Panel, 4" holes
Item #964600 -Sturdy, hot-dip galvanized wire panels are great for lambing and kidding pens, gates, fence lines and many other projects. 1/4 in. dia. rods. 4"x4" spacings.
$83.00 -
Handling Equipment
40" x 72" Welded Wire Panel, 4" holes
Item #964500 -Sturdy, hot-dip galvanized wire panels are great for lambing and kidding pens, gates, fence lines and many other projects. 1/4 in. dia. rods. 4"x4" spacings.
$89.00 -
Handling Equipment
40" x 96" Welded Wire Panel, 4" holes
Item #964400 -Sturdy, hot-dip galvanized wire panels are great for lambing and kidding pens, gates, fence lines and many other projects. 1/4 in. dia. rods. 4"x4" spacings.
$94.00 -
Lambing and Kidding Aids
NutraStart® Milk Replacer for Lambs, 25 lb bag
Item #622320 -Non-medicated first feed for lambs. Provides the entire nutritional requirements from the animal’s second day of life through weaning.
$80.00 -
Lambing and Kidding Aids
NutraStart® Milk Replacer for Goat Kids, 25 lb bag
Item #622330 -Complete feed for goat kids from the second day of life through to weaning. High-protein, non-medicated formula promotes early health and growth.
$84.00 -
Lambing and Kidding Aids
NutraStart® Replacer with Coccidiostat, 25 lb bag
Item #622301 -Milk replacer for baby lambs and goat kids. Formulated with coccidiostat for prevention of coccidiosis.
$84.00
-
Equipment
Replacement Nipple for all LAC-TEK Machines
Item #562851 -Replacement parts for the Auto Feeding LAC-TEK machines.
$3.20 -
Equipment
Water Pump for LAC-TEK & LAC-TEK II Machines
Item #562853 -Replacement parts for the Auto Feeding LAC-TEK machines.
$164.00 -
Equipment
Float Switch for LAC-TEK & LAC-TEK II Machines
Item #562854 -Replacement parts for the Auto Feeding LAC-TEK machines.
$83.10 -
Equipment
Thermostat for all LAC-TEK Machines
Item #562855 -Replacement parts for the Auto Feeding LAC-TEK machines.
$48.00 -
Equipment
Water Valve for all LAC-TEK Machines
Item #562856 -Replacement parts for the Auto Feeding LAC-TEK machines.
$79.77 -
Equipment
Sensor Probe for all LAC-TEK Machines
Item #562857 -Replacement parts for the Auto Feeding LAC-TEK machines.
$14.40 -
Equipment
Heating Element for LAC-TEK Machine
Item #562858 -Replacement parts for the Auto Feeding LAC-TEK machines.
$29.05 -
Equipment
Mixing Blade for all LAC-TEK Machines
Item #562859 -Replacement parts for the Auto Feeding LAC-TEK machines.
$10.06 -
Equipment
Mixing Bowl to Hose Connector (LAC-TEK sold before 6/2018)
Item #562860 -Replacement parts for the Auto Feeding LAC-TEK machines.
$3.72 -
Equipment
Mixing Bowl to Hose Connector (LAC-TEK sold after 6/2018)
Item #5628601 -Replacement parts for the Auto Feeding LAC-TEK machines.
$3.51 -
Equipment
Gasket for LAC-TEK II Machine
Item #562861 -Replacement parts for the Auto Feeding LAC-TEK machines.
$17.98 -
Equipment
Nipple Panel for all LAC-TEK Machines
Item #562862 -Replacement parts for the Auto Feeding LAC-TEK machines.
$42.64 -
Equipment
Nipple Tubing (sold per foot) for all LAC-TEK Machines
Item #562863 -Replacement parts for the Auto Feeding LAC-TEK machines.
$1.02 -
Equipment
Powder Motor for all LAC-TEK Machines
Item #562866 -Replacement parts for the Auto Feeding LAC-TEK machines.
$179.37 -
Equipment
On/Off Switch for all LAC-TEK Machines
Item #562869 -Replacement parts for the Auto Feeding LAC-TEK machines.
$12.43 -
Equipment
Red Light for LAC-TEK & LAC-TEK II Machines
Item #562870 -Replacement parts for the Auto Feeding LAC-TEK machines.
$8.30 -
Equipment
1/4-20 Wing Nut for all LAC-TEK Machines
Item #562872 -Replacement parts for the Auto Feeding LAC-TEK machines.
$1.17 -
Equipment
Auger Mount Hookup for all LAC-TEK Machines
Item #562874 -Replacement parts for the Auto Feeding LAC-TEK machines.
$34.67 -
Equipment
Wiper Drive (Star Assembly) for all LAC-TEK Machines
Item #562876 -Replacement parts for the Auto Feeding LAC-TEK machines.
$89.11 -
Equipment
Thermostat Knob for all LAC-TEK Machines
Item #562880 -Replacement parts for the Auto Feeding LAC-TEK machines.
$2.24 -
Equipment
Hose to Nipple Connector for all LAC-TEK Machines
Item #562881 -Replacement parts for the Auto Feeding LAC-TEK machines.
$3.60 -
Equipment
Spare Parts Kit for LAC-TEK & LAC-TEK II — contains 1 ea: 562852, 562853, 562854, 562855, 562856, 562857, 562859, 562860
Item #562883 -Replacement parts for the Auto Feeding LAC-TEK machines.
$447.50 -
Equipment
Mixing Shaft Complete for all LAC-TEK Machines
Item #562892 -Replacement parts for the Auto Feeding LAC-TEK machines.
$35.52 -
Equipment
Mixing Shaft for all LAC-TEK Machines
Item #562893 -Replacement parts for the Auto Feeding LAC-TEK machines.
$14.20 -
Equipment
Computer Chip for all LAC-TEK Machines
Item #562895 -Replacement parts for the Auto Feeding LAC-TEK machines.
$128.12 -
Equipment
Spare Parts Kit for LAC-TEK & Bebe-Lac — Contains 1 ea: 562852, 562855, 562856, 562857, 562858, 562859
Item #562897 -Replacement parts for the Auto Feeding LAC-TEK machines.
$210.75 -
Equipment
Bowl for LAC-TEK II Machine
Item #562898 -Replacement parts for the Auto Feeding LAC-TEK machines.
$98.37 -
Equipment
Auger Tube for all LAC-TEK Machines
Item #562899 -Replacement parts for the Auto Feeding LAC-TEK machines.
$4.50 -
Equipment
PCB Board for LAC-TEK and LAC-TEK II Machines
Item #562911 -Replacement parts for the Auto Feeding LAC-TEK machines.
$116.00 -
Equipment
Mixing Motor Splash Guard for all LAC-TEK Machines
Item #562914 -Replacement parts for the Auto Feeding LAC-TEK machines.
$5.00 -
Equipment
Triangle Bracket for LAC-TEK II Machine
Item #562915 -Replacement parts for the Auto Feeding LAC-TEK machines.
$12.00 -
Equipment
Cord for all LAC-TEK Machines
Item #562916 -Replacement parts for the Auto Feeding LAC-TEK machines.
$18.83 -
Equipment
Star Drive for all LAC-TEK Machines
Item #562917 -Replacement parts for the Auto Feeding LAC-TEK machines.
$28.41
Write a Review
You must be logged in to leave a review. Please sign in.
Ed K from South Dakota
Like almost everything you buy, they get it to third base but never a home run. When the lambs are working the machine hard (they tend to all want to feed at the same time), it will kick out and you have to reset it. Thats fine and dandy if you are around but if you are not, your lambs go without milk until you come around to reset it. We are too busy to live around our machine so this is a constant irritant. We bought our machine in 2019 and it’s done its job in spite of kicking out on us far too often. Also, why don’t they design the machine to hold a little over a 50 lb. bag? Nobody fills it when it’s completely empty so it needs a hopper to hold a bag plus about 20% more to accommodate how things are done in the real world. Then there are the threads on the screws that hold the cup and top cover. They are unnecessarily long. They want you to clean it every day and spinning off and on the wing nuts for those long threads gets to be annoying. Yes, I would recommend it to those who have a lot of lambs because it’s a huge labor saver but they need to tweak some things.
Robert W from Minnesota
Here's an update on my Lac-Tek. Not only can you not get the same amount of powder to drop out each time. Now it can't keep up with 6 lambs at the same time. It will turn itself off and you have to turn it off and back on and hope it resets. No way this will feed 60 lambs. I have 22 and it doesn't cut it. Check out their liability disclaimer, says everthing.
Robert W from Minnesota
Calibration is at best, just a lucky guess. You can only hope that the same amount of power comes out each time. If you can get past that, it seems to work ok.
Kyle L from Alberta, Canada
Love mine, works great. Replacement parts are cheap and easy to get at local plumbing store.
Deborah G from Maryland
Raised 21 lambs, I pulled a triplet out of each bunch a pair from the quads. Lambs at 4 and half months weighed up to 100 pounds! By far the best way to raise orphans or handle those extra lambs. Most of them exceeded the weights of the ewe raised lambs. And in most cases I kept the runt of the litter for machine raising. 30 to 40 days the machine ran. Almost without a problem. Only change I will make next year is two sets of hoses so I can swap them out to speed up cleaning. Machine has to be kept clean but once you get the hang of it it takes minutes far faster than washing buckets or bottles. The only thing I will do differently is start the lambs on the machine earlier. I was holding them until they were out of the jugs and it was harder to convert them to the nipple on the machine.