Lamb ‘N’ Kid Orphan Feeding Buckets
New! Premier’s Lamb ‘N’ Kid Orphan Feeding Buckets include everything you need to feed milk replacer to orphan lambs and goat kids.
Improvements:
- ✔ See-through bucket design
- Transparent plastic allows for easy monitoring of milk levels. Sloped floor ensures all of the liquid is used by the animal.
- ✔ Easier to clean!
- The teat unit remains attached to the bucket, while the nipple and flow control pin can be quickly removed for washing
- ✔ Easy to read measurements
- Printed ink rulers are visible from the inside of the bucket to provide at-a-glance precision
Need to customize? We offer DIY accessories for building your own bucket feeders.
Instructions/Diagrams:
Specs
- 2 gal Round Bucket, 1 Teat Unit (Item #565825)
- Dimensions: 12" x 11" x 9.25"
- (1) Flat-back Latex Teats
- 2 gal Round Bucket, 3 Teat Units (Item #565826)
- Dimensions: 12" x 11" x 9.25
- (3) Flat-back Latex Teats
- 2.5 gal Square Bucket, 2 Teat Units (Item #565827)
- Dimensions: 12.25" x 11.5" x 9.5"
- (2) Flat-back Latex Teats
- 2.5 gal Square Bucket, 4 Teat Units (Item #565828)
- Dimensions: 12.25" x 11.5" x 9.5"
- (4) Flat-back Latex Teats
Orphan Feeding Kit includes:
- New! Flat-back Bucket
- See-through buckets hang flat against the side of a pen or a wall, so they’re more stable. The sloped floor ensures all of the liquid is used by the animal. And the removable lid protects milk from barn pests including birds and rodents. Holes are pre-drilled, saving time.
- New! Easy Clean Bucket Teat Units
- The unit itself remains on the bucket, while the nipple and flow control pin can be quickly removed for washing.
- Flat-back Latex Teats
- Soft latex teats are easier than rubber teats for small lambs and kids, but they are less durable. We use natural latex teats to get orphan animals started and then switch them over to rubber teats (sold separately).
- Premier Bucket Holder
- Welded wire bracket holds buckets securely. Drops easily into place on wire panels or 1" wood planks.
Need to customize? We offer DIY accessories for building your own bucket feeders.
Tips
- What is the right height for a bucket teat?
- Position the teats as high as a normal mother’s teat, about 9"–12" above the ground.
Why so low? When a young ruminant stretches out its neck to nurse, their esophagus elongates and forms a groove that carries the milk into the 4th stomach (the abomasum).
If the neck is not stretched, the milk falls into the first stomach instead of the fourth. But the first stomach is intended for grass and hay. It doesn’t digest milk well. A first stomach with too much milk enlarges to form a “potbelly”—and the lamb/kid can’t thrive.
- Milk temperature—warm vs. cold?
- Mother’s milk is warm, but it is produced constantly in only small amounts—so lambs can’t take too much at one time. Orphan buckets supply milk in large amounts. If the milk is warm, healthy orphans consume too much. Warm milk spoils rapidly. So we use warm milk only for newborns. Then we switch to cold milk.
- How do I keep the milk cool?
- During warmer weather, we like to freeze water in plastic soda bottles and drop them into buckets. Cold milk forces lambs and goat kids to self-regulate their intake. (They become chilled and stop drinking.)
Keeping the milk cold also reduces the risk of spoilage.
- Do I need any special tools?
- No. Hand strength is all that is required to install the teat units.
Precautions
Do NOT leave empty bucket feeders in the orphan pen. Lambs and goat kids will chew on nipples (in an attempt to feed) and damage the teats. A habit that is not easily reversed.
-
Top
Metal Bracket (for wood) for Feeding Buckets
Item #565822 -Replacement parts for Lamb ‘N’ Kid Orphan Feeding Buckets that have worn out or broken.
$3.75 -
Feeding Orphan Lambs and Kids
Shepherd's Choice® Lamb & Kid Milk, 25 lbs
Item #780002 -Veterinary-formulated milk replacer that provides total nutritional requirements for baby lambs and goat kids.
$72.00 -
Feeding Orphan Lambs and Kids
Shepherd's Choice® Kid Milk, 45 lb bag
Item #780004 -Veterinary-formulated milk replacer with citristim that provides total nutritional requirements for goat kids. 50 lb bag.
$123.00 -
Teats and Nipples
Red Rubber Teats
Item #565200 -Attach nipples to Bucket Teat Units to fed orphan lambs and goat kids. Rubber is more durable for sharp-toothed orphans than latex.
$2.10 -
Teats and Nipples
Flat Back Latex Teat (with washer)
Item #565818 -Soft latex teats are a good choice for newborn lambs and goat kids. Flat-back design fits Premier’s bucket teat units and mountable teat feeders.
$2.20 -
Teats and Nipples
Natural Latex Teats
Item #565300 -Latex teats for nursing lambs and goat kids using bucket teat units. Best for weak animals, or newborns under 10 days of age. Easy to clean.
$2.10 -
Teats and Nipples
Red Latex Teats
Item #565400 -Latex teats for nursing lambs and goat kids using bucket teat units. Best for weak animals, or newborns under 10 days of age. Easy to clean.
$2.10 -
Teats and Nipples
Dairy Kid Latex Teats, long
Item #565815 -Elongated latex nipple for dairy goat kids or other livestock accustomed to nursing from a longer teat. Easy to clean.
$2.20 -
Teats and Nipples
Dairy Kid Long Teats, rubber
Item #565817 -Orphan dairy goat feeding teat with elongated rubber nipple. Mimics size and shape of dam’s teats. “Flat-back” design for use with bucket teat units.
$2.20 -
Teats and Nipples
Calf Teat
Item #565700 -Fits onto Premier's bucket feeding units for a milk source to bottle and bucket calves.
$2.10 -
Buckets and Troughs
Whisk
Item #623000 -Heavy duty, stainless steel whisk. Use to whip eggs or mix milk replacer for lambs or kid goats.
$7.00
-
Buckets and Troughs
Premier Bucket Holder
Item #564700 -Hanging bracket for securing round buckets and square buckets to wire panels or a 1" wood plank.
$4.00 -
Teats and Nipples
Flat Back Latex Teat (without washer)
Item #565818X -Soft latex teats are a good choice for newborn lambs and goat kids. Flat-back design fits Premier’s bucket teat units and mountable teat feeders.
$2.10 -
Teats and Nipples
Bucket Teat Unit, red/blue
Item #565500 -Turn any bucket into a milk feeder. Attach a rubber or latex teat for animals to nurse. Use with orphan lambs, goat kids and calves.
$3.50 -
Top
2 Gallon Round Bucket, 1 hole
Item #565813 -Replacement parts for Lamb ‘N’ Kid Orphan Feeding Buckets that have worn out or broken.
$12.50 -
Top
2 Gallon Round Bucket, 3 holes
Item #565814 -Replacement parts for Lamb ‘N’ Kid Orphan Feeding Buckets that have worn out or broken.
$14.00 -
Top
Lid for Transparent Round Bucket
Item #565816 -Replacement parts for Lamb ‘N’ Kid Orphan Feeding Buckets that have worn out or broken.
$5.00 -
Top
2.5 Gallon Square Bucket, 2 holes
Item #565819 -Replacement parts for Lamb ‘N’ Kid Orphan Feeding Buckets that have worn out or broken.
$18.00 -
Top
2.5 Gallon Square Bucket, 4 holes
Item #565820 -Replacement parts for Lamb ‘N’ Kid Orphan Feeding Buckets that have worn out or broken.
$20.00 -
Top
Lid for Transparent Square Bucket
Item #565821 -Replacement parts for Lamb ‘N’ Kid Orphan Feeding Buckets that have worn out or broken.
$5.00
Write a Review
You must be logged in to leave a review. Please sign in.
Beverly M from Indiana
Best lambar on the market! Wished I’d found it sooner. It can’t get knocked over, easy to clean, no tubes to mess with, allows milk to flow till completely gone, and the kids take to it right away. Game changer!
Michele V from Oregon
Works really well. You do have to use a wrench to tighten so it doesn’t leak.
Sarah C from Maryland
It works ok—it’s much more convenient than individual bottles. The training nipples it comes with are very soft and fragile. Our lambs destroyed them immediately, they didn’t even last a day so order the better nipples when you place your bucket order because you will have a mess on your hands if you don’t. The lid isn’t great and doesn’t stay on that well. It’s nice to be able to give the lambs chilled milk and feed several at once. I wish it had plugs so you can put it in the corner or fiddle with the configuration. You need a wrench to assemble it and even then it might still leak a bit. It’s good, but not amazing.
Carolyn F from Texas
This 6-nipple bucket reduces feeding time to a fraction of bottles. It is lightweight, and I have not used the chilled milk method because I haven’t stabilized the bucket enough. But we are down to twice daily feeding now.
Beth S from Ohio
Easy to assemble and easy to use! I like this solution much better than bottle feeding. I offer chilled milk replacer, so the lambs can eat when they want throughout the day.