- 1" wide
- 8.5" long without tension
- Stretches to 35 lb (half compressed)
- Stainless steel—so it won't rust
How to Use
- Attach one end of spring to a terminal insulator. (The P Spring will simply hook over some insulators; for others, you will need to tie the spring to insulators with rope or wire.)
- Attach conductor to other end of spring by taking the loose end of conductor and putting it through open end of spring.
- Pull conductor until spring is 1/3 to 1/2 compressed.
- Run conductor through the loop one more time and tie off.
- Whenever conductor becomes loose, repeat above steps.
However, if you don't have a helper to hold the tension on the rope, you may lose too much tension in the process of getting the RopeLink wrapped around the rope.
Solution: Attach the P Spring to the terminal insulator and loop the rope through it twice. Then pull the rope tight so the P Spring is FULLY compressed. When you get the RopeLink attached, you may have lost some of the tension on the rope, but the P Spring is half compressed just like it should be.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Sarah P from Illinois
This spring works perfectly as advertised. The product itself is great. The only problem I had is with the shipper. They put my box it a clear plastic garbage bag and left it in the ditch at the end of my very long and shared driveway. Anyone could have stopped and picked it up and I would have never known. Good thing it looked like garbage. I won't place a high dollar order if this is the delivery method.
John M from CO
Simple and effective. My local stores only had large high tensile springs. These are great for a single strand of electric fence.
Joann M from SD
We have been using SW tape & rope combo fences for 9 years, still have all the originals in use. Don't skimp, you need springs! Excellent product! We put 1 on each line where we terminate to eliminate "sag"
James H from Kansas
These springs are great for keeping tension on the rope and they are easy to use.
Carol Ann O from Virginia
The P Spring keeps tension on your fence to prevent sagging. They really do the job well and are the right weight (not too heavy) for low tension fencing. I looked and could not find anything like it in my local stores. Good product!