How to Use
- Female tags will need to be separated from male tags.
- Place the female cap of the tag completely under the spring fingers of the applicator. If numbered, the numbers will be down and the tag will extend away from the tagger. Slide the male tag over the metal pin. If numbered, the numbers will be up and the tag will extend away from the tagger.
- Before you try to insert the tag into the ear, gently squeeze the applicator together to ensure that both the male and female tags are aligned.
- Place the ear between the jaws of the applicator, positioning the male tag on the back side of the ear. Make sure the tag is correctly place.
- Grip the ear quickly and firmly at the proposed position of the tag. Place the point of the tag in contact with the ear close to your thumb. This allows you to feel the vein therefore avoiding it. Completely close the applicator until the tag is inserted through the ear and the female side of the tag.
How-to: Insert Ear Tags in Cold Weather
Plastic tags (all brands) are much easier to install if they are warm. Why? As the temperature drops below freezing, plastic becomes less flexible (more stiff). Forcing the male point of a tag through the female takes many more lbs. of pressure (because the female must expand).
So if you care about your hands it’s a good idea to keep the tags above freezing in very cold weather. It takes very little to do this. One method is to simply store them while tagging in a small bucket, cardboard box or tool box with a lid alongside a sealed pop bottle full of warm water. The warm water will keep both the air and the tags warmer in the container.
Write a Review
You must be logged in to leave a review. Please sign in.
Chad B from Virginia
Just tagged 30 goats... Worked just fine. No problems at all.
Cathy S from Iowa
Would be nice if the tagger came free with the eartags as they used to. Worried about the pin breaking after reading other reviews. Pain in the butt to need 2 taggers for free scrapie tags v. premier tags.
Marlene A from Nebraska
Really hard to get the tags to release. Too stiff for a woman to operate easily.
Wanda/Dale V from Michigan
Very heavy duty but difficult to operate, especially for small hands of a woman. Much preferred our old Premiere one used for the tags you used to sell for USDA. Pin broke after only a couple taggings. Please invent a smaller product for us farm women! If you buy this order more pins at the same time as you will need them.
Stanley from South Carolina
Worked well. No issues.