Q-flex RFID Tags
Radio Frequency Identification (RFID) ear tags have an embedded transponder microchip (FDX-B) that provides instant identification of the animal via an RFID reader. These tags are compatible with any ISO-compliant EID/RFID tag reading device.
Premier’s farms have used RFID ear tags for 10 years. Our shepherds are able to conveniently track and identify every member of the flock electronically.
Tag set includes: (see photos)
- (1) RFID 2-piece ear tag
- Female side: Pre-printed with a unique number that matches the embedded RFID microchip
- Male side: Blank (imprinting is optional)
- (1) Visual 2-piece ear tag
- Female side: Visual tag for additional identification. Pre-printed with the same unique RFID number.
- Male side: Blank (imprinting is optional)
Customize your tags! We can customize the male side of the tags with consecutive numbers or farm/ranch name. Usually shipped within 2 business days.
Q-flex RFID Tags are not Scrapie approved.
How RFID works:When an ear tag transponder enters the electromagnetic field transmitted by the RFID reader it draws power from the field and will send its data to the reader. There are two common forms of transponder encoding used in animal identification: FDX-B (full duplex), and HDX (half duplex). FDX tags, such as the Q-flex RFID Tags, can be made very lightweight and thin, which reduces strain on the animal’s ear.
Each Q-flex RFID Tag has a unique 15-digit number imprinted on it as well as an electronic transponder enclosed in a weather-resistant polyurethane. Our tags use technology standards established by the International Organization for Standardization (ISO). This ensures that all ISO-compliant tags can be read by all ISO-compliant readers, regardless of manufacturer.
- Dimensions: 1.625" x 0.4375"
- 5 tag sets per package
- Tag set includes:
- (1) RFID 2-piece ear tag (4.5 grams)
- (1) Visual 2-piece ear tag (2.5 grams)
- RFID transponder is FDX-B type; read distance up to 23" (antenna and orientation dependent.)
- Compatible with any ISO-compliant EID/RFID tag reading device.
- Polyurethane, 2-piece tag
- Tag color: Yellow
- Insert tags using Q-flex, Pro or Allflex® applicators.
- Can be custom imprinted (male side only) or handwritten on with Marking Pens.
- For management use only! Not for official USDA tag programs.
Female sides cannot be customized, but are pre-printed with a unique manufacturer RFID number. Premier has no control over this number. Multiple packages of 5 may not be consecutive in number, but are consecutive within a package of 5.
Male sides can be custom imprinted with:
- Consecutive numbers or farm/ranch name
- Up to 2 lines of 13 characters
Enter the package quantity of tags above and enter your customization instructions in the field shown in the shopping cart. Type “blank” for no imprinting.
Custom imprinted tags are not returnable.
How to Use
- The male and female tags will come to you slightly connected. You will need to tear them apart.
- Place the flag of the female tag under the metal spring finger. The printed side of the female tag will be against the jaw of the applicator. Slide the male tag over the metal pin. Be sure to push it all the way onto the pin. The printed side of the male tag will be against the other jaw of the applicator.
- Make sure the tag is correctly placed. Slowly squeeze the handles together to be sure the male pin aligns with the female opening (be careful to not put the tag together yet).
- Place the ear between the jaws of the applicator. While gripping the ear, quickly and firmly squeeze the handles together until the male tag is inserted through the ear and into the female tag.
Inserting Tags In Cold WeatherPlastic tags (all brands) are much easier to install if they are warm. Why? As the temperature drops below freezing plastic becomes less flexible (more stiff) and forcing the male point of a tag through the female takes many more lbs. of pressure (because the female must expand).
So if you care about your hands it’s a good idea to keep the tags above freezing in very cold weather. It takes very little to do this. One method is to simply store them while tagging in a small bucket, cardboard box or tool box with a lid alongside a sealed pop bottle full of warm water. The warm water will keep both the air and the tags warmer in the container.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Diana S from California
These work great for lambs less than a month old but the pegs routinely bend and break when the lambs are older than that. 100% worked great in 1-2 week lambs but 100% failure in 4-5 monthers. I have used Q-flex for years, have the applicator and have never had an issue, but these are badly manufactured.
Robert D from New York
RFID Tags work very well but it would be nice if they came in two colors. We would like to tag ewes one color and Rams a different color. It would also be nice if the web connecting the front and rear tags were a bit stronger. The web helps keep the tags from disappearing into the ear when left unbroken but these webs are fairly weak and do break.