SnapOn Harp Clip
Design allows conductors to enter easily, but prevents their escape.
Use a SnapOn Harp Clip Tool for faster and easier installation.
Specs
- Use with 3/8" FiberRod posts
- Made of durable plastic that grips rod tightly
- 25 per package, but sold individually
Installation
- Place clip at an angle on the SmoothCote FiberRod Post or Step-In FiberRods Post with the 2 open ends of clip against the post.
- With thumb and finger, push and twist at the same time. This will spread the jaws of clip and allow them to snap onto post.
- Adjust to desired height by sliding the harp clip up or down on post.
- Thread MaxiShock, rope, twine or narrow tape through clip.
Tip
Precautions
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Insulators
SnapOn Harp Clip Tool
Item #325311 -Aids in the installation of Harp Clip electric fence clips onto 3/8" fiberglass posts.
$1.22 -
Posts and Accessories
SmoothCote™ FiberRods, 3 ft. (3/8 in. dia)
Item #321831 -Lightweight fiberglass posts for use with livestock containment fence or deer deterrent fence.
$1.40 -
Posts and Accessories
Step-In FiberRods, 3 ft
Item #321834 -A 3/8" dia. fiberglass fence post well-suited for rotational grazing. Features a protective polyester veil for longer life and less splintering.
$3.00 -
Posts and Accessories
Step-In FiberRods, 4 ft
Item #321844 -A 3/8" dia. fiberglass fence post well-suited for rotational grazing. Features a protective polyester veil for longer life and less splintering.
$3.61 -
Conductors - Rope-Twine-Wire-Tape
IntelliBraid®, 660 ft. roll
Item #256710 -6mm (1/4") dia. braided rope conductor for electric fences. Black/white color is easy for humans and livestock to see. Polyester for high UV-resistance.
$113.00 -
Conductors - Rope-Twine-Wire-Tape
EnduraSoft® 6.0, 660 ft roll
Item #256500 -Highly visible polyester electric fence conductor with excellent conductivity over long distances. 6mm (1/4") diameter. 25 years probable life.
$98.00 -
Conductors - Rope-Twine-Wire-Tape
IntelliRope® PE 6.0, 660 ft. roll
Item #256900 -6mm (1/4") dia. electrifiable rope for permanent or temporary fences. Polyethylene filaments resist wear and abrasion. An effective anti-deer conductor.
$59.00 -
Conductors - Rope-Twine-Wire-Tape
IntelliRope® PE 4.5, 660 ft roll
Item #245100 -4.5mm (3/16") electrifiable rope for permanent or rotational grazing fences. Tinned copper filaments for high conductivity (50 Ω per 1000 ft).
$40.00 -
Conductors - Rope-Twine-Wire-Tape
IntelliBraid® Twine PE 3.0, 660 ft roll
Item #253530 -Lightweight 3mm braided polywire for portable livestock fences. Slightly thicker than standard twine so it’s more visible to animals and humans.
$28.00 -
Conductors - Rope-Twine-Wire-Tape
IntelliTwine™ 2.25, 660 ft. roll
Item #253500 -2.25mm (12 gauge/.09" dia.) electric fence conductor for temporary livestock and garden fences. Lightweight and easy to move.
$23.00 -
Conductors - Rope-Twine-Wire-Tape
MaxiShock™ Wire, 1320 ft. roll
Item #251000 -Twisted cable conductor for electric fences. Thick layer of galvanized coating for years of outdoor use.
$129.00 -
Conductors - Rope-Twine-Wire-Tape
IntelliTape™, 330 ft. roll
Item #257010 -A 1/2" wide electric fence conductor whose visibility is ideal for horses and other large, fast moving livestock.
$18.00 -
Fence Connectors and Accessories
Fence & Battery Digital Tester
Item #200010 -All-in-one fence tester checks the voltage of energizers, fences and 12V batteries. Simplify electric fence troubleshooting with one device!
$24.00 -
Fencing
Warning Sign
Item #346000 -Let passersby know that your fences are electrified with this easy-to-read electric fence warning sign.
$1.60
Write a Review
You must be logged in to leave a review. Please sign in.
Roger H from OR
These clips are great!! Better than anything I've used before and they just won't break, which I can't say for the ones that come attached to the fiberglass posts that I've purchased locally in the past. They are a little tricky to put on at first but once I learned to to position them with my fingers and then give a little twist, they snap right on. My wife and daughter were able to put them on, no problem, once they learned the motion. They are a little difficult to reposition but I don't mind that because I don't want my conductor slipping up and down. I reposition them for 2 or 3 strands occasionally without a problem. Highly recommended!!
Sharon H from CA
I almost did not buy these after reading Tom's review on how hard they are to put on. So I only ordered a few to begin with, and an installation tool. I do not use the tool. They seem to have the right firmness when putting on the post and sliding, although I try to put at the desired height to begin with. I have not tried to remove one, looks like it would be difficult. Twine will come out with a lot of upward pressure. In this case I used 2, one upside down.
Will D from Kentucky
I love the harp clips! They are small and clean, easy to install, and inexpensive. Because they are dynamic, I can slide them up and down the 3/8" fiberglass posts whenever adjustments to my intellitwine becomes necessary. I've used a ton of them and will continue to use them for all my strand fence needs. Great product!
Tom P from MD
I have been using your products for years and loved all of them. Thank you! And, a big thank you for such an informative catalog! Ok, but these harp clips are the only thing I have ever gotten from you that made me curse...a lot! I appreciate that you came up with something in between the wire clips and screw type (both of which I use), but these harp clips are really difficult to put on (we bent 2 tools within minutes) and they are very difficult to reposition once on the post. They do see to hold the twine very securely, and so if I was going to a long term semi-perm. fence it would be ok, but not worth the time for a fence that was only going to stay up 6 months. Luckily, we didn't order too many, because we definitely are going back to the screw-type & wire clips.
