Trimming Stand
Common Uses
Specs
- Folding carry handle on the stand and ramp prevents sheep from getting their legs caught.
- Stronger mounting points for the side rails (old style could easily be bent if stand was dropped on them).
- Side rails extend further into mounts to prevent them from coming out when leaned on.
- Better fit of headpiece in the stand (old style tended to be loose).
- Improved headpiece securing bolt (easier on the fingers than old style).
Hot-dip galvanizing ensures an attractive appearance and the lowest cost per year of use. (Hot-dip galvanized steel resists rusting longer than painted steel.)
Trimming Stand:
- 48" long x 20" wide.
- Includes the headpiece but not the ramp or side rails.
- Stands 22" off the ground.
- Adjustable headpiece.
- 1" x 1" square tube is 43" long (measured from the bottom of the headpiece).
- Thumbscrew enables users to adjust the front vertical bar up or down to fit most sheep or goats.
- Galvanized.
- 25" tall x 21-1/2" wide.
- Side rails fit securely to the stand to reduce animal movement.
- Reduces risk of accidental falls from the platform.
Optional Ramp:
- 48" long x 20" wide.
- Reduces effort and risk of injury to both animal and user (often encountered when lifting animal onto a stand without a ramp).
- Ramp hooks directly into the diamond mesh on the trimming stand floor.
Benefits
- Inexpensive
- Hot-dip galvanizing ensures an attractive appearance and the lowest cost per year of use. (Hot-dip galvanized steel resists rusting longer than painted steel.)
- Quick and simple to carry and store
- Lightweight
- Ships via UPS
Cost
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Foot Trimming and Care
Trimming Headpiece (only) for Stand
Item #819612 -For trimming show sheep and goats, shearing or foot trimming. Restrains animals at a comfortable level.
$33.00 -
Foot Trimming and Care
Side Rails (optional), set of 2 for Trimming/Milking Stands
Item #819613 -For trimming show sheep and goats, shearing or foot trimming. Restrains animals at a comfortable level.
$45.00 -
Foot Trimming and Care
Ramp (optional) for Trimming/Milking Stands
Item #819611 -For trimming show sheep and goats, shearing or foot trimming. Restrains animals at a comfortable level.
$144.00 -
Milking and Trimming Stands
Milking Headpiece and Tray (only) for Stand
Item #819620 -Securely hold goats and sheep at a comfortable height for milking (22" off the ground).
$84.00 -
Blankets and Hoods
Sheep Blanket, SMALL (35" Length/19" Height)
Item #820001 -Use sheep blankets to keep sheep clean at shows or sales. Can be used with our sheep hoods.
$16.00 -
Foot Trimming and Care
Premier Serrated Foot Trimmer
Item #750900 -Great for cutting tough hooves of larger sheep and goat breeds. Best hand trimmer (in value, ability and quality) for large hands.
$26.00 -
Foot Trimming and Care
ExoTrim™ Trimmer
Item #769510 -Serrated blades slice through hard, dry hooves with ease. Comfortable grip for all hand sizes.
$18.00 -
Hand Shears
Red Shank Hand Shear
Item #866200 -Popular shear for fitting show sheep. 6.5", double hollow ground blades.
$28.00 -
Foot Trimming and Care
ARS 140 DXR Trimmer
Item #769500 -The gold standard hoof trimmer for goat and sheep hooves. Japanese steel blades are 1 3/4" long. Choice of smooth or serrated blades.
$35.00 -
Foot Trimming and Care
ARS 140 DXR Serrated Trimmer
Item #769501 -The gold standard hoof trimmer for goat and sheep hooves. Japanese steel blades are 1 3/4" long. Choice of smooth or serrated blades.
$39.00 -
Hand Shears
Mini Trim Hand Shear
Item #867000 -Short blades are handy for close trimming in tight areas around legs and the head of animals. Also useful for crutching. Made by Burgon & Ball.
$28.00 -
Accessories
Wool Card #1 (For raking)
Item #880010 -Used to bring out the wool fibers for showing and yarn making.
$28.00 -
Clippers and Shears - Large
Premier 4000c Clipper Package w/case, 4 oz oil and Fine blade set
Item #828001 -For precise removal of fleece and hair. Easy to set up and tension. A powerful, lightweight, cool and quiet motor delivers more torque to the clipper blades.
$323.00 -
Clippers and Shears - Large
Premier 4000s 13T Shearing Package w/case, 4 oz oil, Spitfire 4 point cutter, Spirit 13 tooth comb and screwdriver.
Item #829001 -Has a high torque, rare-earth, permanent magnet 110 volt motor that glides through dense wool and hair.
$352.00 -
Clippers and Shears - Large
Premier 4000s 20T Shearing Package w/case, 4 oz oil, Spitfire 4 point cutter, PhantomR 20 tooth comb and screwdriver
Item #829002 -Has a high torque, rare-earth, permanent magnet 110 volt motor that glides through dense wool and hair.
$352.00
Write a Review
You must be logged in to leave a review. Please sign in.
Melissa P from Texas
Really loving this goat stand, ramp, trimming headpiece, & rails. Highly recommend this. We also have milking headpiece w/tray. Anyone who has goats needs this, whether they show or milk. It makes good trimming, blousing, shots, & all other goat care so much easier.
Randy C from Louisiana
Good quality rails but it’s kind of tight to install them on the stand. One side you have to beat it on.
Randy C from Louisiana
Good quality ramp.
Randy C from Louisiana
Good quality stand.
Michael W from West Virginia
We purchased the milking stand, ramp, and a pair of rails to make caring for our small flock of Ngerian Dwarf Goats easierfor a couple of aging hobby farmers. It replaced a larged head gate and chute system acquired when we were raising Boers. All items with a total weight of 90 pounds were shipped in a single carboard box, which was damaged upon receipt. However, the contents were intact in spite of the fact that the head chain was dangling outside the box. I was very pleased with the overall quality and galvanized finish of the parts. The stand, ramp, and one of the rails fit together nicely. The remaining rail was too large to fit in the brackets welded to the side of the stand. It took about 20 minutes work with a flat file to remve burrs inside the bracket and excess material on the rail before they would fit together as intended. Given the price, such adjustments should not be necessary, which us why I rated it as 4 stars instead of 5.
