TuffRing™ II Power Driver
- 1-3/4"L x 3/4"W
- Galvanized steel
How to Use
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Noel H from California
Breaks after about 5 uses at the base. The hex shaft is not a standard quick adapt for most impact drivers, will work but soft and slightly wrong size so can get jammed in collar from slipping. Will order one more and try to augment weld before use, or epoxy the whole thing, or something…
Diana P from Ohio
Worked great on the install. No problems.
Robert S from Tennessee
They work well, BUT you’ll likely split one if you use it without predrilled wood posts. They break where the shaft meets the head. I always order 2–3 at a time. Maybe I will weld them back together. I have about 6 broken bits.
Bruce D from New Hampshire
Good idea, but it breaks at the base. Not a bad weld, but weak material for the stem. We’ve managed to re-weld most of ours, and it is a pain, but seems to work. Just be careful re-welding galvanized steel.
Nicole G from West Virginia
The first one broke after I tried to drive an earth anchor into the ground (after using it for many tough rings). The weld broke. It shouldn't have broken as there didn't seem to be a lot of torque with what I was driving.
The second one broke after 2 Tough Ring II's into treated wood posts. It just sheared off.