Heat Lamp Bulbs
Surprisingly strong glass. Their heft (and performance) have given us confidence in their warming ability on cold winter nights.
- “Never-loose” base (See PDF file above for a side-by-side comparison.)
- Red or clear glass
- 175 watt. Sold/priced in packages of 2.
Smooth Glass Infrared Bulbs
- “Never-loose” base
- Red or clear glass
- 175 watt (Premier's choice) or 250 watt. Sold/priced in packages of 2.
Conventional infrared lamps are cheap—but they usually fail within a month or two. Why?
- The base breaks away from the glass bulb because the high temperature causes the cheap adhesive to degrade.
- Both glass and filament are so fragile that minimal impact shatters them.
"Never-loose" base—they don't use cement adhesive. Instead, the base screws into the bulb. A weld of solder holds the base onto the threads. If a never-loose base ever becomes loose, we will replace at no cost!
Other bulbs—attached with cement adhesive. Heat causes the cement to lose its adhesive property. The base then breaks away from the bulb.
Why do we show you this? Because we included this photo on p. 60 of our 2011 “Equipment That Works!” catalog and p. 16 on our Poultry flyer—and we regret doing so. To prevent any incident (there has been none to our knowledge) we felt we should show you this as a cautionary note.
- Do not use bulbs rated higher that 250w.
- Use quality bulbs as some low quality bulbs have broken off leaving the metal filament in the ceramic fixture.
Please read this note regarding purchase of items #557034 or #557035.
A customer has reported problems screwing PAR (pressed glass) heat lamp bulbs into our orange heat lamp fixtures—so we’ve studied this in detail.
We have concluded that, because the PAR bulbs feel so sturdy and unbreakable in the hand (which they are), some users (including myself) are inclined to screw them in with more hand strength than they use for normal heat lamp bulbs (which are fragile and feel that way).
Using too much strength to tighten the bulbs doesn’t damage the bulbs—but it does deform the brass colored metal inside the ceramic fixtures of our heat lamps.
Mild deformation due to over tightening makes it difficult to screw bulbs in and out of the fixture. Major deformation due to over tightening can flatten the metal so much that the bulb can actually fall out.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Sharon D from New York
All I had to do was hold one of these bulbs to see the obvious difference in quality! It’s so reassuring to not have to worry about a bulb shattering if bumped.
Agnes K from Illinois
Pleased with quality, altho for use in kennel, I may try the 250 next time or just get a couple of heat lamps with 175 bulbs. Very happy with your heating products!!
Michelle from Tennessee
We switched to these bulbs and premier1 heat lamps after our barn burned down after using the cheap ones from tractor supply! No animals lost but will never make that mistake again. These bulbs let this family sleep without worry. I know my animals are safe with the use of these bulbs and industrial heat lamps! Thank YOU!
Patricia E from Florida
We bought these to replace what our bucks decided to play with and break. The other ones seem to all break at the neck; these never do. They are also comparable in price to what is available locally as long as you can make an order that qualifies for free shipping. The cost of shipping cancels out your savings otherwise.
Matt H from Michigan
The bulbs are great. We have been brooding for many years; layers in the winter, broilers spring and summer. This is the first time we bought better bulbs than what the farm stores sell. The farm store bulbs break and go out much more random, leaving the birds cold overnight. We bought some of each of these, the red 250 hard glass, the red 175 pressed glass, the clear 175 pressed glass. Since they last longer, we invested in some of each so we can swap them out depending on the weather and time of year. Gives more options for temperature and i dont have to worry about losing a heat source overnight. The brooder lamps that we move around, we secure to the wall or ceiling with wire (cheap fencing wire) so falling and starting fires is never an issue. My concern was breaking and these bulbs are much better quality so less concerned about that now.