Lamb/Kid Rearing Pen
This build-your-own pen was developed by Premier’s longest serving employee and a longtime shepherd, Gordon. This system allows the shepherd to keep a close eye on young animals to monitor health and performance. Slatted floor system simplifies care of “bonus” lambs and kids. Lambs/kids can stay in this system until weaning (30 days).
Pen includes:
- Two 30" x 45" panel inserts
- Two 30" x 48" panel inserts
- Four slatted floor panels (Slat openings: 1.25" x 0.5")
- Two connecting pins
- Four eye bolts
- Staples (18 qty, 3 bags of six)
- Assembly instructions
Note: Basic lumber (2x4’s and 2x6’s) and wood screws must be purchased locally. See below.
California Residents: Proposition 65 Information
Instructions/Diagrams:
Benefits
- Simplifies care throughout the season
- Slatted floor keeps pen dry, no wet bedding
- Lambs/kids stay close to milk or creep
- Modular design can be expanded for larger flocks
Specs
Pen details:
- Three fixed (in place) panels
- One removable panel allows access in/out of the pen
- A 4 ft x 4 ft pen has space for up to 6 lambs or kids
- Works with Premier’s bucket teat units, bottle racks, feeders, LAC-TEK auto feeding machines and heat lamps
Pen includes:
- Two 30" x 45" panel inserts
- Two 30" x 48" panel inserts
- Four slatted floor panels (Slat openings: 1.25" x 0.5")
- Two connecting pins
- Four eye bolts
- Staples (18 qty, 3 bags of six)
- Assembly instructions
Other materials needed (purchase locally):
- Two 2" x 6" x 8' treated boards
- Five 2" x 4" x 8' treated boards
- Coated wood screws
Customize Your Pen
Precautions
-
Teats and Nipples
Wide Mouth Lamb 'N' Kid Feeding Bottle (with Pritchard Teat & Washer)
Item #562700 -Easy to clean, wide-mouth plastic bottle for feeding orphan lambs or goat kids.
$6.50 -
Feeding Orphan Lambs and Kids
Bottle Rack
Item #563200 -Clever innovation that allows new lambs and goat kids to self-feed from Premier’s Lamb ‘N’ Kid Bottle.
$8.50 -
Teats and Nipples
Plate Assembly Teat Feeder Kit - Single Teat
Item #565800 -Build an orphan feeding system that works for you. Mountable DIY feeders for lambs and goat kids pull milk from a reservoir and feature a one-way valve.
$17.00 -
Heat Lamp and Accessories
Prima Heat Lamp® (bulb not included)
Item #557100 -A rugged and reliable heat lamp used to warm lambs, goat kids, chickens or for any animal that is sick or cold. Use standard or infrared heat bulbs.
$44.50 -
Buckets and Troughs
Grain Feeder, 22 lb
Item #938208 -Galvanized metal feeders for sheep and goats, 22 and 44 lb capacities. For feeding creep for lambs/kids.
$78.00
-
Wire Panels and Accessories
Eyebolt
Item #936100 -Plated steel bolt for holding connecting pins, tie gates shut and a multitude of farm uses.
$2.10 -
Handling Equipment
Ground Rod and/or Connecting Pin, 3'
Item #151200 -Effectively ground energizers or firmly secure handling equipment. Galvanized pin is resilient to rust and wear.
$8.00 -
Equipment
Bag of Staples (18, 3 bags of 6)
Item #360220 -Replacement parts for Premier's lamb and kid rearing pen. Simplify orphan rearing.
$1.00 -
Equipment
30" x 48" Panel Insert, (3" x 5" holes), each
Item #966100 -Replacement parts for Premier's lamb and kid rearing pen. Simplify orphan rearing.
$42.00 -
Equipment
30" x 45" Panel Insert, (3" x 5" holes), each
Item #966101 -Replacement parts for Premier's lamb and kid rearing pen. Simplify orphan rearing.
$39.00 -
Equipment
Slatted Floor Panels (24" x 24"), each
Item #966102 -Replacement parts for Premier's lamb and kid rearing pen. Simplify orphan rearing.
$21.00
Write a Review
You must be logged in to leave a review. Please sign in.
Jasmine C from Iowa
** Sturdy plastic build, but watch the slat sizing! **
The product is made of a sturdy plastic, I was glad to see that it wasn't as flimsy as I had anticipated. So that is great, where I didn't give it a glowing review though, is the spacing holes claim states that the slat openings are 1.25" x 0.5") and I ordered sets of these based on that description. The average poop pellets I'm dealing with would need the full 0.5" width slat, however these slats are much closer to 3/8" and poop pellets do not effectively fall through them.
Secondary to this, and while frustrating, but tolerable, there were minor amounts of the slat holes that hadn't been properly cut all the way through. Might be a mold defect, as several of my panels had them in the exact same spot. But a bit of quality control check and an exacto knife could have corrected that prior to client orders being shipped out.
While not a deal breaker on the latter issue, the first one is a significant issue that should either be corrected in the mold/manufacturing or simply be advertised differently. Would I recommend this, yes, if it'll work for your average poop draining needs knowing the width is not accurate. It's excellent for urine and very fine pellets. I will still have a use for them on my homestead, just not in the same capacity. Frustrating, but still a great product for an average need I guess?
Brayden K from Wisconsin
The slotted floor panels work really well, just wish the interlocking part was a little bigger to actually interlock. Also I had a nice surprise when I orderd 12 to complete 3 pens didnt realize these come as a 4 pack. Which is definitely a plus because now I can make so many more pens.