Skip to content

FREE Ground Delivery on qualified items for orders over $100. Learn More »

Shop Products
0 Items

Catalog Quick Order

Do you know the item # of the product you want to order?

Notice

The item you have selected () is back-ordered and will not be shipped with the rest of your order. If you order now, we will ship it to you as quickly as possible after it arrives.

  or  

Item Not Found

The item you have selected () could not be found. Please check the item # you entered.

ElectroFence® Gates

★ ★ ★ ★ ★ (23) Read reviews »

48" ElectroFence Gates allow for quick access in or out of the paddock. Simply lift the handle, remove the post from the dock and go on through. For a shorter gate, look to 35" ElectroNet gates.

This a complete gate that can be added to the ends of existing nets (or between permanent fences) and electrified. Gate post locks in place via a handle and docking station. Stainless steel clips at each end of the gate provide electrical connections to netting. Gate's drivable posts can be used in hard soils.

Same mesh spacings as ElectroFence but with tighter verticals, 6" instead of 12".

Available as a 7.5 ft walk-through or a 21.5 ft for vehicles and whole flocks.

  • ElectroFence Gate (7.5 ft x 48" tall), black/white with black posts

    Item #340616 | Weight 6.30 lbs
    In Stock
    $60.00

  • ElectroFence Gate (21.5 ft x 48" tall), black/white with black posts

    Item #340617 | Weight 8.00 lbs
    In Stock
    $67.00

  • ElectroFence Gate (7.5 ft x 48" tall), green/black with white posts

    Item #340627 | Weight 6.30 lbs
    In Stock
    $60.00

  • ElectroFence Gate (21.5 ft x 48" tall), green/black with white posts

    Item #340628 | Weight 8.00 lbs
    In Stock
    $67.00

  • Replacement Dock (no stakes) for NetGates, black

    Item #340618 | Weight 0.50 lbs
    In Stock
    $4.62

  • Replacement Handle for NetGates, black

    Item #340631 | Weight 0.20 lbs
    In Stock
    $4.00

  • Replacement Stake for NetGate Dock, each

    Item #340651 | Weight 0.50 lbs
    In Stock
    $2.00
Videos & Data
Electric NetGate Installation Play
Electric NetGate Installation

Instructions/Diagrams:

Common Uses
For entering/exiting semi-permanent or perimeter sheep/goat paddocks without having to turn off the fence energizer. Can be easily angled out from gate posts to guide the flock or herd in or out of a field.

Specs
  • 48" tall installed.
  • 11 horizontals (10 conductive).
  • Horizontals are white/black or green/black.
  • Black/white gates have black posts and green/black gates have white posts.
  • Horizontal spacings from bottom to top are: 4", 4", 4", 4", 4", 4", 6", 6", 6", 6".
  • Verticals are white plastic struts placed every 6".
  • 7.5 ft and 21.5 ft length options.
  • Contains gate, posts, handle & docking station.
  • Drivable posts are .75" PVC with a metal spike that goes into the ground.
  • 21.5 ft gate contains a center post.

Benefits
One-handed operation—insulated handle lifts and locks into place over the drivable end post. Squeeze the handle to the post and lift to unlock.

Drivable posts—can be inserted into hard soils with a mallet or dead blow hammer.

Two more conductive strands than ElectroNet Gates—better for semi-permanent and perimeter fences, or for fences with high predator pressure.

Installation
The same “unroll and then unfold” process applies to all electrified nets. Minimal strength or skill needed (and no tools).

If the gate is to be used in the middle of a fence line, and power needs to be carried across, simply use a PowerLink to carry the power over to the continuing section of fence.

Precautions
Electric fence is a pain barrier, not a physical barrier. A common mistake is not electrifying it. Animals may escape or become entangled (and may die). On a % basis, entanglement is very rare, but it can and does occur. If animals are scared or starved it will not keep them in.

Warning! Due to risk of fire, do NOT use continuous output energizers with electric netting or electro-plastic conductors such as rope, twine or tape. Use only with a low or wide impedance intermittent pulse energizer. (Fi-Shock™ brand energizers which are sold as low impedance, continuous current output should NOT be used with electric netting.) All energizers sold on Premier’s website use an intermittent pulse and are suitable for use with electric netting.

Dry conditions and wintertime usage may reduce the effectiveness of electric netting. We do not recommend the use of electric netting during harsh winter conditions—ice and heavy snow can flatten netting and thereby damage it.

Dry or frozen ground may cause post spikes to bend or break if inserted with force. Pilot holes may be needed.

Troubleshooting
If the voltage drops below 3000V on the net, you need to turn off the energizer and unhook the net from the energizer. Test just the energizer by itself. If the voltage is 5000V or higher on the energizer the problem is in the net. The most common problem is that the lowest 'hot' strand has been caught around one of the metal spikes on the posts and is shorting it out. The net must be at least 2" away from anything metal (metal posts, existing fences, spikes on support posts).

Accessories

Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.

Replacement Parts
Reviews (23)
Average Rating: ★ ★ ★ ★ ★ 4.3 out of 5
Number of reviews: 23 customers reviewed this product.
Recommended: 21 out of 23 said they would recommend this product to a friend.

Write a Review

You must be logged in to leave a review. Please sign in.

ElectroFence® Gates
★ ★ ★ ★ ★

I have had to step over, or drop a section of net fence to access my livestock and garden area for years. It is a hazard, particularly when one gets a foot tangled in a hot fence. I saw this gate. Hmm, rather expensive but considering how often I go through, worth it. I get the gate, look at the instructions, and discover one has to manually connect or disconnect the hot metal clips to open or close the gate. I feed power through that area to a much larger one and it is not a circle. I emailed to ask if they had a fix for that, just told me I could return it if I like. That would be shipping both ways, once already. They need some sort of spring loaded or connection that is insulated but connects when one places the closing post. I will keep this and think on how I will fix it. As it is, useless.

The fence you’re describing must get its power from energy which passes through the gate, so you have a couple of options:
  1. Add a PowerLink™ between the end of the gate and the next section of fence. You will still need to (dis)connect a single alligator clip, but you won’t need to turn off the fence at the energizer.
  2. Bury or run a small section of insulated wire between the ends of the gate. This will allow you to maintain an “always-hot” fence, even when the gate is open.
— Premier
ElectroFence® Gates
★ ★ ★ ★ ★

I love the gate. It makes access to my goats so much easier.

ElectroFence® Gates
★ ★ ★ ★ ★

Love the gate. So much easier entering pasture. Easy to set up. The hole spacing is larger than the electric netting so if you have young chicks it might not work. But it definitely solves the annoying problem of having to shut off fence every time you want to enter.

ElectroFence® Gates
★ ★ ★ ★ ★

I am so happy I purchased this product. I would hate to have to undo the actual fencing every time I had to grab a goat out for milking. This makes it so easy. Plus, with the extra wide opening, I am comfortable taking the tractor through.

ElectroFence® Gates
★ ★ ★ ★ ★

The gate is pricey but it works very well. I'm happy with it, easy to use, and will buy another one soon.