Xperience Clipper
Product Details
New! The Xperience Clipper from Heiniger is a high performance machine designed for the clipping and fitting of cattle, horses and other large animals. Runs quietly—less likely to spook nervous animals than other brands.
Benefits:
- Slim, contoured grip for all-day comfort
- Lightweight and agile, for trimming in tight areas
- Powerful motor ensures a smooth finish
- Fiberglass reinforced housing for durability
- Quiet operation—ideal for clipping nervous animals
Instructions/Diagrams:
Heiniger Xperience Instruction Manual 
Specs
- Dimensions: 11"L x 2"W x 2"H (with 12' cord)
- Weight: 2.6 lbs
- Grip diameter: 1.75"
- Single-speed 200W permanent magnet motor generates 2,500 strokes/min
- Noise emission: 84 dB (A) with blades
- Precision made in Switzerland
Kit includes:
- Xperience Clipper
- 35/17 Blade Set with screwdriver
- 3.5 oz oil
- Cleaning brush
- Hardshell carrying case
X-Series Clippers — Quick Comparison
 |
 |
 |
|
|---|---|---|---|
| Heiniger Xperience (Corded) |
Heiniger Xplorer (Battery) |
Heiniger Xplorer Pro (Battery) |
|
| # of speeds | 1-speed | 1-speed | 2-speed |
| Strokes/min | 2,500 | 2,450 | 2,450 or 2,900 |
| Decibels w/ blades | 84 dB | 87 dB | 85/89 dB |
| Weight | 2.6 lb | 2.15 lb | 2.15 lb |
| Tension indicator | ✘ | ✘ | ✔ |
| Battery runtime | 2 hrs | 90–120 mins | |
| Time to recharge | 90 mins | 90 mins | |
| # included batteries | (2) Li-ion | (2) Li-ion | |
| Battery capacity | 2850 mAh | 2850 mAh | |
| Battery level LED | ✘ | ✔ |
How to Use
Preparing the Animal for Clipping
- Remove the dirt from the hair first. If this is not done, expect accelerated blade wear and a reduction in animals clipped between blade sharpenings in exact proportion to the amount of dirt present. The benefits of dirt removal prior to clipping cannot be over-emphasized. Example: Those who wash their lambs prior to clipping often clip 20–30 club lambs between sharpenings (if the blades have been sharpened properly on a lapping machine). Those who don’t and have lambs with sand and soil in the wool often clip less than two lambs between sharpenings.
- Washing the animal with soap and water removes the most dirt. If this is not practical, use a high power vacuum or blower to remove as much dirt as possible from the hair or wool.
- Restrain the animal. Few animals like the sound of a clipper or the feel of vibration on their skin. When they react to either without warning, accidents can and will happen. Therefore, for the sake of you, your animal and your clipper, restrain the animal properly prior to clipping.
Changing the Clipping Blades
- Important: Power the unit off before removing the clipper blades.
- Turn the adjusting knob counter-clockwise until the resistance decreases.
- For ease of installation, turn machine upside down.
- Loosen the bottom clamping screws and remove the clipping blades.
- Place the new top blade onto the guiding tips of the swiveling lever. Apply a few drops of oil on the polished surfaces of the top blade.
- Firmly tighten both bottom clamping screws. (You should be able to read the imprinting on the bottom blade if installed correctly.)
- Before turning the unit right side up, tighten the tension knob on top of the clipper head until you feel slight resistance. This keeps the top blade positioned correctly when turning the unit over.
Setting the Correct Tension
- Before you start clipping, tighten the adjusting knob clockwise until you begin to feel resistance.
- Turn the knob another 1/4 turn clockwise. The machine is now ready for use.
- While clipping, repeat the steps above to make tension adjustments. If the blades aren’t cutting well, increase tension. If this does not produce the desired result, the blades must be replaced or sharpened.
- If the clipping pressure is set too low, hair can gather between the clipping blades. This results in a poor clipping quality. Use the supplied brush to clean the blades and clipping head. Lubricate with clipping oil and re-tension.
Precautions
Warning: Unlike some other clipper motors, this motor will neither slow down nor sound different when oil is needed. But failure to oil will quickly cause damage to the blades and drive head. So you MUST apply oil by time instead of sound.
Use a lightweight clipping oil for lubrication. Apply a small amount of oil every 3 minutes to the tips of the teeth and each side of the blade. Every 10 minutes add oil into the small hole in front of the tension knob assembly. Excessive wear can occur if not oiled properly!
Warranty
If spare parts are used during the life of this product, please ensure they are genuine Heiniger parts. Failure to use genuine Heiniger parts may reduce the performance of this product and will void any warranty claim.
Premier is an authorized Heiniger repair center and offers a professional resharpening service for most blades, combs and cutters.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Clipper Blades - Large
Heiniger 18/15 Clipping Blade Set
Item #830614 -A coarse clipping blade set for tough, thick hair or fiber. Cutting depth is 0.079-0.157" (2-4mm).
$42.75 -
Clipper Blades - Large
Heiniger 18/23 Clipping Blade Set
Item #830613 -A tough clipping blade set to push through dirty coats on livestock and horses. 2-4mmm cutting depth.
$42.75 -
Clipper Blades - Large
Heiniger 21/23 Clipping Blade Set
Item #830612 -Clipping blade set for livestock. Fewer teeth than finer combs to cut through dirty coats. Cutting depth of 0.079-0.157" (2-4mm).
$42.75 -
Clipper Blades - Large
Heiniger 31/23 Clipping Blade Set
Item #830611 -Medium depth clipping blade set for livestock and equine. Ready animals for summers on the farm or the show ring.
$42.75 -
Clipper Blades - Large
Heiniger 31F/15 Clipping Blade Set
Item #830610 -Fine clipping blade set for trimming hair on livestock and horses. Leaves 1-2mm of cover on after clipping.
$43.25 -
Clipper Blades - Large
Heiniger 35/17 Clipping Blade Set
Item #830609 -Clipping blade set for livestock and equine use on the farm or show ring. Cutting depth of 2-4mm.
$42.75 -
Clipper Blades - Large
Heiniger 35F/17 Clipping Blade Set
Item #830608 -Heiniger's clipping blade set for styling livestock and horses. 35 tooth bottom blade and 17 tooth top blade.
$51.75 -
Clipper Blades - Large
Heiniger 53/23 Clipping Blade Set
Item #830607 -Surgical style clipping blade that fits Heiniger's Handy, Xplorer, Xplorer Pro and Xperience Clipping Machines.
$71.50 -
Professional Shears
#10 White Clipping Oil, 4 oz bottle
Item #258200 -A high-quality clear clipping and shearing oil to lubricate blades, combs and cutters. Reduces risk of stain to wool fibers and hair.
$3.25 -
Resharpening Service
Resharpen - LARGE Clipper Blades (per set)
Item #868800 -Resharpen your blades, combs or cutters. Rapid turnaround, precision finish, low cost! Custom-engraving available.
$7.00
-
Clipper Blades - Large
Heiniger 35/17 Clipping Blade Set
Item #830609 -Clipping blade set for livestock and equine use on the farm or show ring. Cutting depth of 2-4mm.
$42.75
Write a Review
You must be logged in to leave a review. Please sign in.
