Skip to content

FREE Ground Delivery on qualified items for orders over $100. Learn More »

Shop Products
0 Items

Catalog Quick Order

Do you know the item # of the product you want to order?

Notice

The item you have selected () is back-ordered and will not be shipped with the rest of your order. If you order now, we will ship it to you as quickly as possible after it arrives.

  or  

Item Not Found

The item you have selected () could not be found. Please check the item # you entered.

IntelliShock 10 (Plug-In) Energizer Kit

★ ★ ★ ★ ★ (12) Read reviews »

An energizer kit that runs off of 110V (plug-in) power. Plug the unit in at an outlet and carry the power to the fence via the insulated cable.

Kit Includes:

Plug unit into a 110V wall outlet, or connect to an external 12V battery. (Connectors included for both. See Specifications below.)

⚠ California Residents: Proposition 65 Information

  • IntelliShock 10 (Plug-In) Energizer Kit

    Item #1120102 | Weight 7.75 lbs
    Back-ordered: Expected on 12/02/2024
    $201.30
Videos & Data
Installing a Plug-in Energizer Play
Installing a Plug-in Energizer

Instructions/Diagrams:

Common Uses
A 110V AC or 12V DC electric fence energizer used mostly to keep out deer, raccoons and rabbits from garden/orchard areas. It is also used to keep in poultry, cattle, sheep, goats, horses, and guard dogs. Effective at protecting against coyotes, stray dogs, bear and fox.

Specs
  Plug-in Kit*
#1120102		 Battery Kit*
#1120103		 Energizer Only
#1120101
IntelliShock 10 Energizer ✔ ✔ ✔
(1) Ground Rod (galvanized) 3 ft 3 ft
(1) Ground Rod Clamp ✔
(1) Hanging Nut ✔
MaxiShock Insulated Cable 100' roll
Wiring Harness ✔ ✔
110V AC Adapter ✔ ✔ ✔
DC Battery Leads ✔ ✔ ✔
Digital Tester ✔ ✔
*Kits include all the parts and pieces that folks new to electric fence normally need to make the fence operational.

Should power…**

  • 2 miles of 3 strand cattle fence
  • 3/4 mile of a 5-7 strand sheep fence
  • 10 of the 164' sheep/goat nets
  • 4-5 of the 164' poultry nets
**All distances are dependent on amount of grass/weed load on the fence. Low-impedance circuitry produces a short, very strong electrical pulse designed to cope with moderate weed load.

Miscellaneous

  • Requires a grounding system. Inadequate grounding is the most common failure in an electric fence system. We recommend 3 ft. of grounding for this energizer, included in the kit.

Energizer Specifications

  • 1.00 released joules
    • 1.00 joules in moist soils
    • 0.32 joules in dry soils
  • Pulses per minute: 38
  • 12V DC draw: 31-90 mA/hr
  • 110V draw is 4.5 watt per hour
  • Impedance type: low – pulse type
  • Load sensing/variable draw: yes
  • Input: AC/DC

AC adapter and DC leads included with all IntelliShock 10 units:

How to Use

To use light tester WITHOUT ground probe

For Fence:
  1. Touch the top of the tester to the electrified fence you wish to test.
  2. Push the button (if applicable).
  3. The tester will light up according to the voltage at that location on the fence.
For Energizer:
  1. Turn off energizer.
  2. Disconnect ground wire and fence wire from energizer.
  3. Turn on energizer.
  4. Touch the top of the tester onto the top of the fence terminal on the energizer.
  5. Push the button (if applicable).
  6. The tester should light up to 6000 volts or more.

To use light tester WITH ground probe

For Fence:
  1. Insert the probe of the tester into the soil.
  2. Remove your hand from the metal portion of the probe (to avoid a shock).
  3. To get a voltage reading, touch the metal clip (on the top of the tester) to the electrified fence you wish to test.
  4. The tester will light up according to the voltage at that location on the fence.
  5. Remove the tester from the fence and the probe from the soil. Do not remove the probe by pulling the insulated wire.
For Energizer:
  1. Turn off energizer.
  2. Disconnect ground wire and fence wire from energizer.
  3. Turn on energizer.
  4. Touch probe from tester to ground terminal on energizer (be sure to hold onto the insulated wire and not the metal probe!)
  5. At same time touch the fence hook on tester to fence terminal on energizer.
  6. The tester should light up to 6000 volts or more.

Benefits
Versatile, can be used as a plug-in energizer or as a battery energizer. Adapts from one style to the other in a few seconds. Can be moved around easily. Low cost.

Troubleshooting
You’ll need an electric fence tester (included with kit) to measure voltage.

Start by measuring the voltage at the end of the fence line. If the voltage is below 3000V, follow these steps to determine if the problem is with the fence, or the energizer.

  1. Turn off the energizer.
  2. Disconnect the wires going to the fence and ground stake/rod.
  3. Turn the energizer back on.
  4. Measure the voltage on the energizer between the two terminals (positive and negative) with a digital voltmeter or other high-voltage tester. Touch one end to “-“ (earth terminal) and the other end to “+” (fence terminal). The reading tells you how well the energizer is working without any other variables.
  5. If the tester reads below 5000V, then the energizer (or possibly the battery) is the problem. If the voltage is above 5000V, then the trouble lies with your fence.
Determine if the battery or the energizer is the problem.
  • Test the battery with a low-voltage tester; recharge if lower than 12.2 volts
  • Check the grounding system
LEARN MORE
Re-attach the fence and ground wires to the energizer and turn it on. Then, walk or drive along the fence looking for situations that are reducing the voltage:
  • Conductors touching another wire, steel post or the soil
  • Broken or damaged insulators
LEARN MORE

Precautions
Make sure the energizer is unplugged before working on the fence or the energizer.

To Reduce Risk & Liability

  • Never place your head or upper spine near an electrified wire. Accidental head or neck contact can occur when pushing a voltage probe into the soil. Be careful when doing so to avoid head-to-wire contact!
  • Never attempt to step over or climb through an energized fence of any kind.
  • Never encourage anyone to touch an electric fence.

Warranty
3-year warranty for energizers and solar panels cover lightning damage and defective parts or workmanship. Should an energizer fail, we will replace the unit, bill you for the cost to do so, then reimburse you for warranted expenses after we have examined the failed unit. Misuse and flood damage are not covered.

Accessories

Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.

Replacement Parts
Reviews (12)
Average Rating: ★ ★ ★ ★ ★ 4.7 out of 5
Number of reviews: 12 customers reviewed this product.
Recommended: 11 out of 12 said they would recommend this product to a friend.

Write a Review

You must be logged in to leave a review. Please sign in.

IntelliShock 10 (Plug-In) Energizer Kit
★ ★ ★ ★ ★

This electric fence energizer works great. We have fenced in our garden to protect it from the little critters, squirrels, raccoons and deer. So far it has kept them out of the garden and that is what matters to us.

IntelliShock 10 (Plug-In) Energizer Kit
★ ★ ★ ★ ★

Chickens are now safe!! Purchased this energizer and have not had any critters get any of my chickens. Easy to set up and use.