Shop Products

P Spring

Name: P Spring
Brand: Premier 1
Price: 3.10 USD
Availability: InStock
Rating: 4.8 (47 reviews)

★ ★ ★ ★ ★ (47) Read reviews »

Used to maintain desired tension on electrified low-tension conductors. For best results, install a P Spring every 1320 ft.

Use with the following conductors:

Videos & Data

Common Uses

Use to keep rope fences pulled tight.

Specs

1" wide
8.5" long without tension
Stretches to 35 lb (half compressed)
Stainless steel—so it won't rust

How to Use

Attach one end of spring to a terminal insulator. (The P Spring will simply hook over some insulators; for others, you will need to tie the spring to insulators with rope or wire.)
Attach conductor to other end of spring by taking the loose end of conductor and putting it through open end of spring.
Pull conductor until spring is 1/3 to 1/2 compressed.
Run conductor through the loop one more time and tie off.
Whenever conductor becomes loose, repeat above steps.

Tips

When using electrified rope (any of it), use P Springs and RopeLinks. The goal is to have the P Springs half compressed when everything is all put together.

However, if you don't have a helper to hold the tension on the rope, you may lose too much tension in the process of getting the RopeLink wrapped around the rope.

Solution: Attach the P Spring to the terminal insulator and loop the rope through it twice. Then pull the rope tight so the P Spring is FULLY compressed. When you get the RopeLink attached, you may have lost some of the tension on the rope, but the P Spring is half compressed just like it should be.

Accessories

Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.