- 8.5" long without tension
- 1" wide
- Stretches to 35 lb (half compressed)
- Stainless steel
- Should not rust
- Use with all types of rope conductors
- Easy to use
How to Use
- Attach one end of spring to a terminal insulator. (The P Spring will simply hook over some insulators; for others, you will need to tie the spring to insulators with rope or wire.)
- Attach conductor to other end of spring by taking the loose end of conductor and putting it through open end of spring.
- Pull conductor until spring is 1/3 to 1/2 compressed.
- Run conductor through the loop one more time and tie off.
- Whenever conductor becomes loose, repeat above steps.
However, if you don't have a helper to hold the tension on the rope, you may loose too much tension in the process of getting the RopeLink wrapped around the rope.
Solution: Attach the P Spring to the terminal insulator and loop the rope through it twice. Then pull the rope tight so the P Spring is FULLY compressed. When you get the RopeLink attached, you may have lost some of the tension on the rope, but the P Spring is half compressed just like it should be.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Tamara W from Illinois
Great product, we are in the process of replacing all of our high tensile wire fence with rope fencing. (Big job!) The p-springs are easy to use and make it easy to get your fence tension just right!
Cynthia R from New York
I am a backyard horse owner, but want a secure , attractive fence. P-Springs are easy to use, keep the fence tight, no sagging except under heavy icing conditions, or tree falls after which the fence will spring back into shape or just need minor tightening. The springs protect the fence thus protect your livestock and help limit repairs.
I really like these springs. They are much smaller than the ones at our local TSC, which I like. Keep my braided fence tight.
40 acres of 14gauge steel wire electrified with one spring every quarter mile per line on a support post, running a 3 line fence and anything that hits it bounces off and the return to tension is impressive. these springs are a must if running any electric fence not considered high tensile. Not like anything you can find at a local feed store. They give and take with temperature fluctuations and will save you on repairs in the long run...don't set up your electric fence without these!