Premier 4000s Shearing Machine
Has a high torque, rare-earth, permanent magnet 110 volt motor that glides through dense wool and hair.
Only the most-experienced shearers can push it fast enough to cause it to lose cutter speed.
Premier 4000s Packages includes:
- Premier 4000s Shear
- Spirit or Phantom R Comb
- Spitfire Cutter, 4 point
- Premier Case
- Key, for locking case
- Screwdriver
- 4 oz bottle of oil
- Instruction manual
Instruction Manual 
Benefits
- Lighter
- Quieter
- Easier to handle
Common Uses
- Blocking show sheep
- Shearing smaller flocks
- Shearing fiber goats
- Peeling and blocking beef & dairy cattle
- Shearing alpacas and llamas
Use with our combs and cutters.
Specs
- 110 volt
- Quieter. Less motor "whine", kind to your ears and less likely to upset animals.
- 2700 strokes per minute cutting speed
- Permanent rare-earth magnet motor enable more torque (power) and require less space and weight than ordinary motors. Less heat is produced by the permanent magnet motor and the fan forces air forward through our heads—so the heads run 20°F cooler.
- Up to 20% shorter in length than other motors
- Weighs up to 15% less than other motors
- Smaller grip than other motors
- Sleek, low profile head design (sharp visual look that catches your eye and impresses observers)
- Internal roller bearings instead of bushings (less heat, less wear and greater longevity)
- Suspended fork system (reduces risk of stripping the gear drive or breaking comb teeth)
- No cutter retainer or retaining spring (both caused hassles and broke too readily)
- Improved tensioning concept (spring clip is more effective at retaining tension than cupped washers)
- Only 3 minutes to change a shear head to clipper head
- Motor has a 16 ft electrical cord
- Designed and assembled in USA from domestic and foreign parts
Tips
Tensioning Shear Heads—Why the correct tension is so critical!
To get the tension right:- Tighten the tension knob, until resistance is felt, to force the cutter against the comb. Tighten an additional 1/2 turn.
- Apply shearing oil to the comb and cutter.
- Turn on the machine. Tweak tension according to comb/cutter heat/cutting ability. To find the sweet spot, adjust tension cautiously while operating.
- Wool gets under the cutter, which prevents cutting. Remove the cutter, clean out the wool, replace the cutter, then reset the tension.
- The cutter may fly off, allowing forks to drop between the comb’s teeth—which strips the drive gear.
- Causes excessive friction, dulling the cutting edges quickly.
- Heat builds on both the comb/cutter and shearing head.
Preparing the Animal for Clipping
- Remove the dirt from the hair first. If this is not done, expect accelerated blade wear and a reduction in animals clipped between blade sharpenings in exact proportion to the amount of dirt present. The benefits of dirt removal prior to clipping cannot be over-emphasized. Example: Those who wash their lambs prior to clipping often clip 20–30 club lambs between sharpenings (if the blades have been sharpened properly on a lapping machine). Those who don’t and have lambs with sand and soil in the wool often clip less than two lambs between sharpenings.
- Washing the animal with soap and water removes the most dirt. If this is not practical, use a high power vacuum or blower to remove as much dirt as possible from the hair or wool.
- Restrain the animal. Few animals like the sound of a clipper or the feel of vibration on their skin. When they react to either without warning, accidents can and will happen. Therefore, for the sake of you, your animal and your clipper, restrain the animal properly prior to clipping.
Precautions
Failure to oil as often as recommended may lead to excess heat and premature wear and tear.
Warning: Unlike some other clipper motors, this motor will neither slow down nor sound different when oil is needed. But failure to oil will quickly cause damage to the blades and drive head. So you MUST apply oil by time instead of sound. Apply a small amount of oil every 3 minutes to the tips of the teeth and each side of the blade by dipping them into a dish of oil or pouring oil directly onto the teeth with a small oil container and every 10 minutes drip oil into the small hole behind the tension knob assembly. Excessive wear can occur if not oiled properly!
Warning: Risk of electrical shock—Connect only to a branch circuit protected by a ground-fault circuit-interrupter (GFCI). Contact a qualified electrician if you cannot verify that the circuit is protected by a GFCI.
Warranty
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Professional Shears
#10 White Clipping Oil, 4 oz bottle
Item #258200 -A high-quality clear clipping and shearing oil to lubricate blades, combs and cutters. Reduces risk of stain to wool fibers and hair.
$3.20 -
Professional Shears
Spitfire Cutter
Item #850000 -Standard 4 point cutter for shearing machines. Works well with Premiers combs and shearing heads.
$7.00 -
Professional Shears
Spirit Shearing Comb
Item #861200 -An excellent comb for beginner shears. Easy to control while providing a quality finish. Can be resharpened by Premier.
$25.00 -
Professional Shears
Phantom R Shearing Comb
Item #863300 -Sheep shearing comb for Premier's shearing machines. For shaping show animals or shearing sheep with course wools.
$28.00 -
Professional Shears
Phantom S Shearing Comb
Item #863400 -For shaping show animals. 20 tooth comb fits Premier machines. Not for against the skin use.
$28.00 -
Combs and Cutters - Large
Comb Lifter
Item #862700 -Leaves a layer up to 0.75" of uncut fiber on camelids, goats and other hair species.
$5.00 -
Professional Shears
Heiniger Camelid Shearing Comb
Item #862600 -Specialized 13-tooth comb for shearing llamas, alpacas, camels, vicuñas and guanacos. Swiss-made by Heiniger.
$51.00 -
Professional Shears
Heiniger Mohair Shearing Comb
Item #862500 -Short bevel shearing comb for Mohair goats. Also used for llamas, alpacas and Angora goats. Swiss-made by Heiniger.
$36.00 -
Professional Shears
Apache Shearing Comb
Item #862000 -For shearing range ewes, feeder lambs and winter farm flocks.
$28.00 -
Professional Shears
Blackhawk 92 Shearing Comb
Item #860500 -Sheep shearing 13 tooth comb for farm/range flocks and blocking show stock.
$28.00 -
Combs and Cutters - Large
Ceramic Cutter
Item #850040 -Holds cutting edge up to 3 times as long as normal shearing cutters. Ideal for tough fiber and wool.
$16.00 -
Professional Shears
Heiniger Storm Shearing Cutter, each
Item #850030 -Ultra-thick cutter (4.6mm) runs evenly across the comb. Recommended for use with winter and cover shearing combs. Made in Switzerland by Heiniger.
$7.00 -
Clipping and Shearing Machines
Clipper Head Only
Item #828004 -Interchangeable clipping head fits onto Premier 4000 shearing and clipper motor.
$73.00 -
Accessories
Comb Screwdriver
Item #824600 -For securing combs to shearing machines. Provides more leverage than a normal screwdriver and fits comb screws on all major shearing units.
$3.00 -
Resharpening Service
Resharpen - COMB (each)
Item #870000 -Resharpen your blades, combs or cutters. Rapid turnaround, precision finish, low cost! Custom-engraving available.
$2.00 -
Resharpening Service
Resharpen - CUTTER (each)
Item #869000 -Resharpen your blades, combs or cutters. Rapid turnaround, precision finish, low cost! Custom-engraving available.
$1.50 -
Accessories
Premier Clipper/Shearer Case
Item #824000 -This carrying case protects your clipping or shearing machine and accessories from damage. Internal pre-molded tray hold everything in place.
$44.00
-
Clipping and Shearing Machines
Shear Head Only
Item #829004 -Interchangeable shearing head fits onto Premier 4000 clipper and shearing motor.
$159.00 -
Clipping and Shearing Machines
Premier 4000 Clipper/Shearing Motor Only
Item #828007 -Drives either Premier's shear head or clipping head. Powerful permanent magnet motor with high torque.
$218.00
Write a Review
You must be logged in to leave a review. Please sign in.
Gary R from Missouri
First time I have used it and works great. Used on an older alpaca that was missed during regular shearing.
Laurie T from Tennessee
These clippers are quality. Yes, it is hard to teach yourself how to shear a sheep. However, Premier provides so much information online that honestly, we felt prepared! Yes, it is hard to get the blades set perfectly at first, and kind of terrifying how sharp they are. It is also just hard to DO at first, but like anything else, the more you do it, the easier it becomes. Customer service has been so helpful, and being able to send the combs and blades back for sharpening is inexpensive and excellent. We also got a pair of the hand shears, and it is super helpful to have them. Premier is great at supporting their products. Absolutely no complaints.
Kayla K from Michigan
We only have 2 sheep to shear, it’s kind of a pain to oil every 3 minutes and they did get hot, but they got the job done and were VERY sharp.
Cory V from New York
They sent me the wrong one, which was inconvenient since I had to sheer on a specific day.
Mindy L from Wisconsin
Crappy scheers bought them for my angora goats a few years ago they cut like crap. I’ve had nothing but issues with it. It gets hot fast and has started smoking. It’s been sent in for this once already and its back to the same crap. I scheer no more than 4 animals once a year. Would rather have an Oysters even though I’ve herd they are heaiver with I used for dairy cattle for years.
