Q-flex® 3 Ear Tags
Excellent for adult rams and ewes. Readable by most folks. Not too heavy for an adult animal's ears.
Customize your tags! We can customize your tags with consecutive numbers or farm/ranch name. Usually shipped within 2 business days.
Scrapie approved in all colors except blue.
While we now show a preview of your customized tags, please be aware that final imprinting may vary.
- Dimensions: 1.63" x 1.5"
- 20 tags per package
- Polyurethane, 2-piece tag
- Insert tags using Q-flex, Pro or Allflex® applicators.
- Tag colors in order of visibility and contrast of the printed numbers: Yellow, White, Spearmint, Salmon, Pink, Lime, Black, Blue, Fuchsia, Red, Green, Gray, Purple and Orange.
- Can be custom imprinted or handwritten on with Marking Pens.
- Scrapie approved in all colors except blue.
Follow the steps above to customize your tags online. (Note: While we now show a preview of your customized tags, please be aware that final imprinting may vary.)
Need a different customization option? You can provide special instructions during checkout. Or call us at 800-282-6631 to place your order.
How to Use
- The male and female tags will come to you slightly connected. You will need to tear them apart.
- Place the flag of the female tag under the metal spring finger. The printed side of the female tag will be against the jaw of the applicator. Slide the male tag over the metal pin. Be sure to push it all the way onto the pin. The printed side of the male tag will be against the other jaw of the applicator.
- Make sure the tag is correctly placed. Slowly squeeze the handles together to be sure the male pin aligns with the female opening (be careful to not put the tag together yet).
- Place the ear between the jaws of the applicator. While gripping the ear, quickly and firmly squeeze the handles together until the male tag is inserted through the ear and into the female tag.
Note: We will print both sides (male and female) unless otherwise specified. Scrapie approved tags are not available in blue. Flock ID number will be imprinted on female side only unless otherwise indicated.
Inserting Tags In Cold Weather
Plastic tags (all brands) are much easier to install if they are warm. Why? As the temperature drops below freezing plastic becomes less flexible (more stiff) and forcing the male point of a tag through the female takes many more lbs. of pressure (because the female must expand).
So if you care about your hands it’s a good idea to keep the tags above freezing in very cold weather. It takes very little to do this. One method is to simply store them while tagging in a small bucket, cardboard box or tool box with a lid alongside a sealed pop bottle full of warm water. The warm water will keep both the air and the tags warmer in the container.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Vicki L from North Dakota
We used our new tags as soon as we received them and we are pleased as always. We appreciate the speed in which we receive an order. Now if we could just keep the sheep from pulling their tags out!
Carie J from Idaho
We raise sheep and I ordered colored official scrapie tags so we could quickly identify the registered sheep from the crossbred sheep. I customized the male side with the farm name. They double checked they customized order and the tags were delivered in three days. The printing is great.
Colette K from Kentucky
I finally used these tags on my lambs. They are still way too large for a small lamb, but I had no other tags to use. Within two weeks I noticed tags missing on my lambs. I also noticed several lambs had infections due to the tags. In three years I have never ever had these problems with the smaller Q-flex tags, nor with the scrapie tags. I am thankful I only purchased a small order of these tags; I will not be purchasing these again.
Peder/Barb G from Montana
We have purchased eartags from Premier for the past 7 years. These tags are really disappointing. We tag some 40-60 lambs per day in the heat of lambing and with the male and female tag not being connected has been frustrating. Solved by only putting 10-20 numbers in a series in baggies, but having multiple baggies to keep tags paired...ugh. almost miss matched numbers several times. Also, I want to beable to write above the number yet the trademark imprint (on the male part) of the tag interferes makes for messy numbers. BIGGEST problem: we have had several tags(6-8) rip out of the lambs' ear. This NEVER happened with the Easy Tag or the 2xt. I do not understand why Permier messed with a good thing with getting rid of the 2 xt. That tag never let us down. These tags are way to heavy for Icelandic lambs under 6 pounds, so we use those "tiny" Qflex. The snapp tag, tho not long standing was the PERFECT temp tag for those tiny lambs. I am very diappointed and am not sure yet for next year. The saving grace and the only reason for the one star is that we can use the AllFlex tagger instead buying ANOTHER new tagger.
Colette K from Kentucky
Nice tags; easy to read. (These are large tags!)
I wish they were smaller, so I can use them on my young lambs.
(Minus one star for their large size.)
The smaller size of the old Easy Tags was perfect!