How to Use
- Female tags will need to be separated from male tags.
- Place the female cap of the tag completely under the spring fingers of the applicator. If numbered, the numbers will be down and the tag will extend away from the tagger. Slide the male tag over the metal pin. If numbered, the numbers will be up and the tag will extend away from the tagger.
- Before you try to insert the tag into the ear, gently squeeze the applicator together to ensure that both the male and female tags are aligned.
- Place the ear between the jaws of the applicator, positioning the male tag on the back side of the ear. Make sure the tag is correctly place.
- Grip the ear quickly and firmly at the proposed position of the tag. Place the point of the tag in contact with the ear close to your thumb. This allows you to feel the vein therefore avoiding it. Completely close the applicator until the tag is inserted through the ear and the female side of the tag.
How-to: Insert Ear Tags in Cold Weather
Plastic tags (all brands) are much easier to install if they are warm. Why? As the temperature drops below freezing, plastic becomes less flexible (more stiff). Forcing the male point of a tag through the female takes many more lbs. of pressure (because the female must expand).
So if you care about your hands it’s a good idea to keep the tags above freezing in very cold weather. It takes very little to do this. One method is to simply store them while tagging in a small bucket, cardboard box or tool box with a lid alongside a sealed pop bottle full of warm water. The warm water will keep both the air and the tags warmer in the container.
ApplicatorsItem #6300880 -
Used for applying all styles of Q-flex ear tags. Powder coated aluminum won't rust.$5.00
Write a Review
You must be logged in to leave a review. Please sign in.
Wendy M from California
Bulky! Pin broke on second tag of the day.
Tricia & Bob S from Missouri
Pin broke on the fourth tag that we put into a lambs year. I went back to my trusty 20 year old grey metal tagger!
Crystal E from California
It's a little bulky but works fine. It doesn't hold the female tag real securely, which isn't great, but on the flip side the tag slips out easily after the tag is applied, which is nice. Nothing worse than trying to catch a tagger that's stuck on the tag you just applied as the sheep is flinging it around!