RopeLink 2.6 and 2.45
How to Use
- To work correctly, rope(s) must be overlapped the length of the RopeLink.
- Starting at either end of RopeLink, lay overlapped rope into the first curl.
- Hold link with thumb and finger; with other hand, wrap overlapped rope into the rest of curls.
- After there is tension on the rope, the RopeLink will not slip.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Eric L from Virgina
Works well. Nice that no tools are required. Holds against quite a bit of tension on a 6mm rope splice. I've only had them in for a couple weeks so far, but my favorite solution for splicing and terminating.
Justin S from Vermont
I use RopeLink for tie-offs and splices with 4.5mm rope and they work great. Very handy, simple, and reusable.
Philip W from Vermont
Great, would be nice if ends were just a bit smoother but I can do that easy enough with wire wheel. I like to keep a couple in my pocket.
Michael D from Illinois
Easy and quick to use. Lasts a long time. Effective for splicing or holding tensioned lines. Highly recommended if splicing or attaching charged line to rope.
Joel R from Minnesota
I love these for attaching a hot wire to rope. I used to wind the wire around the rope to make the connection, which often became almost impossible to remove. Now I just strip a length of bare wire equal to the rope link and wind it up. With the rope links, it's easy to pop them off if needed, and the length ensures a good electrical contact.