RopeLink 2.6 and 2.45
How to Use
- To work correctly, rope(s) must be overlapped the length of the RopeLink.
- Starting at either end of RopeLink, lay overlapped rope into the first curl.
- Hold link with thumb and finger; with other hand, wrap overlapped rope into the rest of curls.
- After there is tension on the rope, the RopeLink will not slip.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Richard P from Kentucky
These really work well. Better than I expected. I’ll be ordering more.
Theodore D from Ohio
These are ingenious! Easy to use and makes a very secure connection.
Larry P from Montana
Kurt B from Iowa
These are the absolute best idea!! Simple to use. I used only one to keep (2) 660' wires together for over 4 months. Also the best ever for finishing an electric line so I don't have to tie knots at its end and break the silver wires or have that end from a tie off touch the metal post and short out the line. Always have when checking lines. Best idea ever!
Amy K from Wisconsin
Having done electric fencing before, I was skeptical about how the whole end-post system would work: insulator, p spring, and RopeLink. It was not only extremely easy, but the tension on the rope is great! It’s much easier than using connectors that require tools. I also ran insulated wire under two gates, stripped the ends, and stuck the wire through the loops on the installed RopeLinks. It made a great connection, conducting the charge under the gates. I highly recommend the RopeLinks.