Premier 4000s Shearing Machine
Has a high torque, rare-earth, permanent magnet 110 volt motor that glides through dense wool and hair.
Only the most-experienced shearers can push it fast enough to cause it to lose cutter speed.
Premier 4000s Packages include:
- Premier 4000s Shear
- Spirit or Phantom R Comb
- 4 point Spitfire Cutter
- Case
- Screwdriver
- 4 oz bottle of oil
- Instruction manual
Complete Manual 
Benefits
- Lighter
- Quieter
- Easier to handle
Common Uses
- Blocking show sheep
- Shearing smaller flocks
- Shearing fiber goats
- Peeling and blocking beef & dairy cattle
- Shearing alpacas and llamas
Use with our combs and cutters.
Specs
- 110 volt.
- Quieter. Less motor "whine", kind to your ears and less likely to upset animals.
- Permanent rare-earth magnet motor enable more torque (power) and require less space and weight than ordinary motors.Less heat is produced by the permanent magnet motor and the fan forces air forward through our heads- so the heads run 20 degrees F cooler.
- Up to 20% shorter in length than other motors.
- Weighs up to 15% less than other motors.
- Smaller grip than other motors.
- Sleek, low profile head design (sharp visual look that catches your eye and impresses observers).
- Internal roller bearings instead of bushings (less heat, less wear and greater longevity).
- Suspended fork system (reduces risk of stripping the gear drive or breaking comb teeth).
- No cutter retainer or retaining spring (both caused hassles and broke too readily).
- Improved tensioning concept (spring clip is more effective at retaining tension than cupped washers).
- No more black plastic sides (these were prone to falling off and frustrating users).
- Only 3 minutes to change a shear head to clipper head.
- Motor has a 16 ft electrical cord.
Tips
Preparing the Animal for Clipping
- Remove the dirt from the hair first. If this is not done, expect accelerated blade wear and a reduction in animals clipped between blade sharpenings in exact proportion to the amount of dirt present. The benefits of dirt removal prior to clipping cannot be over-emphasized. Example: Those who wash their lambs prior to clipping often clip 20–30 club lambs between sharpenings (if the blades have been sharpened properly on a lapping machine). Those who don’t and have lambs with sand and soil in the wool often clip less than two lambs between sharpenings.
- Washing the animal with soap and water removes the most dirt. If this is not practical, use a high power vacuum or blower to remove as much dirt as possible from the hair or wool.
- Restrain the animal. Few animals like the sound of a clipper or the feel of vibration on their skin. When they react to either without warning, accidents can and will happen. Therefore, for the sake of you, your animal and your clipper, restrain the animal properly prior to clipping.
Precautions
Failure to oil as often as recommended may lead to excess heat and premature wear and tear.
Warning: Unlike some other clipper motors, this motor will neither slow down nor sound different when oil is needed. But failure to oil will quickly cause damage to the blades and drive head. So you MUST apply oil by time instead of sound. Apply a small amount of oil every 3 minutes to the tips of the teeth and each side of the blade by dipping them into a dish of oil or pouring oil directly onto the teeth with a small oil container and every 10 minutes drip oil into the small hole behind the tension knob assembly. Excessive wear can occur if not oiled properly!
Warning: Risk of electrical shock—Connect only to a branch circuit protected by a ground-fault circuit-interrupter (GFCI). Contact a qualified electrician if you cannot verify that the circuit is protected by a GFCI.
Warranty
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Accessories
#10 White Clipping Oil, 4 oz btl.
Item #258200 -A high-quality clipping and shearing oil to lubricate blades, combs & cutters.
$3.00 -
Professional Shears
Phantom S Shearing Comb
Item #863400 -For shaping show animals. 20 tooth comb fits Premier machines. Not for against the skin use.
$19.00 -
Professional Shears
Phantom R Shearing Comb
Item #863300 -Rounded tips and long shearer's bevel reduces nicks. For shaping show animals and shearing llamas, goats & coarse wools.
$19.00 -
Combs and Cutters - Large
Comb Lifter
Item #862700 -For use with a shearing comb. Designed to leave a longer cut.
$5.00 -
Professional Shears
Camelid Comb
Item #862600 -Specialized comb for shearing llamas, alpacas, vincunas, guanacos and camels. Leaves a cover of 6 - 10 mm of hair/wool.
$52.00 -
Professional Shears
Heiniger's Mohair Shearing Comb
Item #862500 -Extra teeth reduces risk of nicks and leaves smoother results.
$46.00 -
Professional Shears
Apache Shearing Comb
Item #862000 -Preferred by "pros" because it pushes through the wool easier. The extra wool that it leaves protects sheep from cold and sun.
$20.00 -
Professional Shears
Blackhawk 94 Shearing Comb
Item #861800 -Extra thin. Long tooth bevels. Flared teeth on both sides.
$20.00 -
Professional Shears
Spirit Shearing Comb
Item #861200 -An excellent comb for beginner shears. Easy to control while providing a quality finish. Can be resharpened by Premier.
$20.00 -
Professional Shears
Blackhawk 92 Shearing Comb
Item #860500 -All purpose flared comb for small flocks and show animals.
$20.00 -
Combs and Cutters - Large
Ceramic Cutter
Item #850040 -Holds cutting edge up to 3 times as long as normal cutters.
$15.50 -
Professional Shears
Storm Shearing Cutter
Item #850030 -Specifically made for use with 9 tooth combs like our Apache. Tooth shape enables cutter to run evenly across the comb.
$9.00 -
Professional Shears
Spitfire Cutter
Item #850000 -Standard 4 point cutter for shearing machines. Works well with Premiers combs and shearing heads.
$7.00 -
Clipping and Shearing Machines
Clipper Head Only
Item #828004 -Two uses in one! Interchangeable clipper head fits onto same motor as our shearing machine.
$71.00 -
Accessories
Shear Machine Sleeve
Item #824607 -Genuine leather sleeve to care for and enclose your Premier 4000s shearing machine.
$15.00 -
Accessories
Comb Screwdriver
Item #824600 -For securing combs to shearing machines. Provides more leverage than a normal screwdriver and fits comb screws on all major shearing units.
$3.00 -
Resharpening Service
Resharpen a COMB (each)
Item #870000 -Resharpen your blades, combs or cutters. Rapid turnaround, precision finish, low cost! Custom-engraving available.
$2.00 -
Accessories
Premier Clipper/Shearer Case
Item #824000 -This carrying case protects your clipping or shearing machine and accessories from damage. Internal pre-molded tray hold everything in place.
$34.00
Write a Review
You must be logged in to leave a review. Please sign in.
Benjamin K from PA
First time shearing sheep was made easy with Premier 4000 and the ceramic blade. Don’t get me wrong, it is not an easy process for the beginner, but having the right tool is very helpful. The metal blade was much harder to use. For the comb we first used 13T and made a few cuts into the skin. Then ordered 21T comb. Didn’t try it yet, but think it should be easier because we will not have to worry about cutting the skin .
Cathleen D from Vermont
Just finished shearing my Angora Goat buck Prince today. I know, I am about 2 months late. I was very nervous because I had never done it before. I was afraid I might cut him. Not one nick. I kept putting it off. I feel bad. I had no reason to be nervous. These shears are amazing and so easy to use. I am so glad I listened to the review by Michael W. from New York. I agree with everything he said. Thanks for making such a great product. Do you have a smaller one that would be good for Angora Rabbits? I have those too.
Erika R from Ohio
Your company is fabulous to work with. The staff is very knowledgeable and service is wonderful and fast. Thanks for everything you do.
Kevin F from Ohio
I would recommend this product to friends, it’s a wonderful product.
Harvey P from Georgia
Clippers great!! Blades would not cut llama fiber.....
