How to Use
- Female tags will need to be separated from male tags.
- Place the female cap of the tag completely under the spring fingers of the applicator. If numbered, the numbers will be down and the tag will extend away from the tagger. Slide the male tag over the metal pin. If numbered, the numbers will be up and the tag will extend away from the tagger.
- Before you try to insert the tag into the ear, gently squeeze the applicator together to ensure that both the male and female tags are aligned.
- Place the ear between the jaws of the applicator, positioning the male tag on the back side of the ear. Make sure the tag is correctly place.
- Grip the ear quickly and firmly at the proposed position of the tag. Place the point of the tag in contact with the ear close to your thumb. This allows you to feel the vein therefore avoiding it. Completely close the applicator until the tag is inserted through the ear and the female side of the tag.
How-to: Insert Ear Tags in Cold Weather
Plastic tags (all brands) are much easier to install if they are warm. Why? As the temperature drops below freezing, plastic becomes less flexible (more stiff). Forcing the male point of a tag through the female takes many more lbs. of pressure (because the female must expand).
So if you care about your hands it’s a good idea to keep the tags above freezing in very cold weather. It takes very little to do this. One method is to simply store them while tagging in a small bucket, cardboard box or tool box with a lid alongside a sealed pop bottle full of warm water. The warm water will keep both the air and the tags warmer in the container.
ApplicatorsItem #6300880 -
Used for applying all styles of Q-flex ear tags. Powder coated aluminum won't rust.$5.00
Write a Review
You must be logged in to leave a review. Please sign in.
Hope C from Maine
Works well but would recommend a this side top on it since I did put a few tags in backwards
Trey & Larry R from Idaho
Pins are very soft, have 2 sets of taggers, and each pin only lasted about 35 head before bending. Tagger itself is ok, but heavy and bulky. The older plastic ones from the previous tag version were much better. I have gone to an Allflex tagger for the Q3 tags, it works much better for me.
Emily T from Hawaii
We used this Q-flex applicator over the weekend on 12 lambs and 17 older ewes (all hair sheep). This was my first time using any type of ear tag applicator and it went quite smoothly. The lambs were very easy to tag with one hand and some of the older ewes required 2 hands to press the applicator together, but all in all, it went very well. I had purchased a replacement pin just in case after reading the reviews, but never had to use it since the original pin held up just fine.
Mary W from Maine
Shelley L from Canada
Not impressed with them. I got the first one and it's so hard to squeeze I need three hands to use it. So I got a second and it's the same thing. Bend a lot of pins as well. But gets the job done