Quick Clean Waterer (with legs), 3 gal
- Capacity: 3 gallon
- Size: 13"H, 15" pan diameter and 1.5" pan depth
- Suited for: adults
- Number of birds: 35
- Waterfowl: yes
- Has three legs to stand up and out of the bedding to reduce coiling of water tray. Legs elevate waterer 5".
- Simple design that's easy to clean and refill. To fill remove red lid and add water. Ideally refill with a hose because it's heavy to carry when filled to the top.
- Worked both indoors and outdoors.
How to Use
We suggest periodically dismantling and cleaning the unit to prevent hard water and algae build up from obstructing the float system.
For proper function place waterer on a level surface. If used outside, the lid may blow off in strong winds.
Poultry SuppliesItem #53002513 -
Replacement parts for Quick Clean Waterer (with legs), 3 gal.$6.06
Write a Review
You must be logged in to leave a review. Please sign in.
Jenni L from Virginia
Love this! Works great and looks great as well!
Vicki L from California
This could be a nice waterer if it didn't leak from the bottom. I have taken in apart and put it together numerous times. Will try one more time tonite. It shouldn't be this hard!!! Love the other tripod waterer even if the top hole makes it harder to clean the inside. Easy to adjust with the knob on the spigot at the bottom. Turn off to fill, then turn on to let water flow.
Naomi M from Delaware
I purchased 2 of these waterers I like the height to keep some debris out but it does have a flaw the plastic donut fills with water and that makes the water continuously come out so it never stays filled. My husband had to seal it with aquarium sealant to keep it from filling and now there is no problems with the waterer emptying 20 minutes after I fill it. Also it is a pain to clean you have to take it apart because it grows algae in the parts not visible from the outside. I have had mine for about 1 year and the red top is clear from fading.
Well made and holds 3 gal. but I have 8 hens who do not need 3 gallons a day. Wish this was smaller. It has a large foot print in the run.
Easy to clean. I have a sand run and although it is up on concrete blocks, it still gets sand in the trough.
Dan J from Florida
Came shipped with multiple parts that needed assembly. Easy to
Put together by make sure you don't strip the plastic nut onto the plastic male
Locking portion that connects the two together. After a day tighten the nut again as it leaked a little. Once it is assembled just hose it out to clean as needed. Large capacity makes it low maintanence.