SmoothCote™ FiberRod Posts (3/8 in. dia.)
Portable inexpensive post that are used as line post on multi-strand fences and as extra support post for netting.
Clip options:
Benefits
Specs
- 3, 4, 5, 6 or 7 ft tall
- 3/8" diameter
- White in color
- An extra UV resistant urethane outer coating to prevent fiberglass splinter
- Pencil-pointed
- Drive Caps (sold separately)
- 20 per package, but priced individually. When ordering, please put in quantities of 20, 40, 60, etc.
Installation
- Attach a Drive Cap (sold separately) and drive the pencil-pointed end into ground with a hammer at designated area. If not using a drive cap use a rubber mallet so as not to create splinters on the post.
- Attach a SnapOn Harp Clip, ScrewOn Rope/Tape Insulator or PowerGrip Clip to the post.
- Insert twine, rope and narrow tape.
Tip
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Posts and Accessories
FiberRod Post Driver
Item #321880 -Hand-held post pounder to help drive fiberglass poles into the ground. Steel pipe construction with welded handle fits posts from 3/8" dia. up to 11/16".
$6.80 -
Posts and Accessories
Drive Cap for 3/8" posts, each
Item #321810 -Place over the top of fiberglass posts prior to insertion. Reduces damage and increases the lifespan of the post.
$0.61 -
Insulators
ScrewOn Rope/Tape Insulator, each
Item #325400 -For holding rope, twine and narrow tape onto portable electric fence posts.
$0.39 -
Fence Connectors and Accessories
Dead Blow Hammer, orange
Item #205015 -Versatile hammer delivers a controlled impact with minimal vibration and rebound.
$11.00 -
Insulators
PowerGrip Clip, each
Item #325000 -Simple spring metal clip that hold electric fence conductors to 3/8" insulated fence posts.
$0.20 -
Insulators
SnapOn Harp Clip, 3/8", each
Item #325310 -For attaching conductors at desired height on 3/8" fiberglass posts. Design allows conductors in but prevents their escape.
$0.30 -
Insulators
SnapOn Harp Clip Tool
Item #325311 -Aids in the installation of Harp Clip electric fence clips onto 3/8" fiberglass posts.
$1.22
Write a Review
You must be logged in to leave a review. Please sign in.
Dolly K from Kansas
Screw on insulators work great with the posts. This lets you raise the hot wire or lower it depending on size of the animals. Plus you never have to worry about a short like you do with rebar posts. Deer also see the white posts and the ones that drag their feet going over do not break the posts as they give and keep the fence in place.
Sharon H from California
These do not have fiberglass splinters like some I bought elsewhere. And they come with a drive cap. It was very annoying to find no drive cap included with the other posts when I was out a long ways to from the shop.