Bear QuikFence® 12/35/12
- 12 horizontal strands
- 35" tall installed.
- Vertical struts every 12 in.
- Line posts (built-in) every 12.5 ft.
- Drivable Posts: 0.31" dia.
- Stops bears in both wet and dry fencing conditions.
- Lowest strand can be disconnected to reduce energy leakage when green grass gets tall.
- Pos/Neg capability (for dry soils).
- Drivable posts can be pounded in with a dead-blow hammer or mallet.
- .75" dia post with fiberglass cables for added support.
- Brown drive-cap to easily determine which posts are drivable.
- Single spike (only) has a flange for support when inserting post.
Pos/Neg capabilityBear QuikFence can be set up as a Pos/Neg fence:
- (Lower diagram far right) At the top of the netting, disconnect the 2 stainless steel clips.
- Using a PowerLink connect the lower clip to the ground rod.
- Connect fence lead to the netting’s top clip.
To InstallThe same “unroll and then unfold” process applies to all electrified nets. However, this net is heavier and post spikes are larger than our other nets (therefore more difficult to push into the soil). Extra supports such as FiberTuff™ step-in posts are useful at corners, curves and ends. You will need a fence energizer to electrify the net.
Even for new users, it takes less than 10 minutes to go from out-of-the-box netting to installed fence. And it’s durable! Nets last over 10 seasons if used and stored properly. (Its mortal enemy is errant lawn mowers!)
FREE shipping on qualified orders over $100!
To purchase Bear QuikFence
- Measure the fence line.
- Choose the length and the amount of netting needed. (Example: A 250 ft fence requires two 100 ft net and one 50 ft net.).
- Choose extra support posts for ends, major curves and corners.
- Select an energizer, ground rod and a fence tester.
We offer many fences to fit your situation, including different heights and lengths, multiple colors, drivable posts and positive/negative options for dry soils. Questions? Call our fence consultants at
Electric NettingItem #205100 -$170.00
Posts and AccessoriesItem #205010 -
Replacement line posts for Premier’s netting. Designs for each type of net, double or single spike.$3.07
Fence Connectors and Accessories
Repair Kit for Bear QuikFence, VersaNet 60, ElectroNet (DP), PoultryNet (DP), ElectroStop (DP), ElectroFence & Plus, PermaNet & PlusItem #201730 -
A handy repair kit that includes all of the essentials to patch tears and holes in electric net fences.$2.00
Electric fence is a pain barrier, not a physical barrier. A common mistake is not electrifying it. Animals may escape or become entangled (and may die). On a % basis, entanglement is very rare, but it can and does occur. If animals are scared or starved it will not keep them in. The first time you put the animals in the net, you should be available to watch them for a while. That way if one were to get into the fence and get caught, you can turn the power off and get them loose.
Warning! Due to risk of fire, do NOT use continuous output energizers with electric netting or electro-plastic conductors such as rope, twine or tape. Use only with a low or wide impedance intermittent pulse energizer. (Fi-Shock™ brand energizers which are sold as low impedance, continuous current output should NOT be used with electric netting.) All energizers sold on Premier’s website use an intermittent pulse and are suitable for use with electric netting.
Dry conditions and wintertime usage may reduce the effectiveness of electric fencing. Ice and heavy snow can flatten netting and thereby damage it.
Dry or frozen ground may cause post spikes to bend or break if inserted with force. Pilot holes may be needed. We recommend using drivable or single spike posts in hard soils. Double spike posts provide more stability when the ground is soft.