Anti-Deer Fence (2D Scented 5-Strand)
Consists of 5 strands of electrified rope on FiberRod™ line posts with insulated steel or wood posts at ends and corners.
Fence was effective for most of the year around a commercial tree nursery that previously had high deer damage. Deer breeding season is an exception for most pain barriers because bucks stop for nothing when does are "in season."
As low as 65¢ per ft.
Refresh scent caps often.
Drive the posts. Attach insulators. Insert and tension rope. Keep strands low to prevent deer crawling under them. Place one strand at nose height of a walking deer. Voltage should be above 3500. Use a wide impedance energizer.
You also need an energizer for this fence. Please refer to the Energizer section of our website to determine your needs.
NOTE: Dry conditions and wintertime usages—may reduce the effectiveness of electric fencing.
We offer many fences to fit your situation, including different heights and lengths, multiple colors, drivable posts and positive/negative options for dry soils. Questions? Call our fence consultants at
Electric fence is a pain barrier, not a physical barrier. A common mistake is not electrifying it. Animals may escape or become entangled (and may die). If animals are scared or starved it will not keep them in. The first time you put the animals in the net, you should be available to watch them for a while. That way if one were to get into the fence and get caught, you can turn the power off and get them loose.
Use only with a low or wide impedance intermittent pulse energizer. Warning! Due to risk of fire, do NOT use continuous output energizers with electric netting or electro-plastic conductors such as rope, twine or tape. (Fi-Shock™ brand energizers which are sold as low impedance, continuous current output should NOT be used with electric netting.) All energizers sold on Premier’s website use an intermittent pulse and are suitable for use with electric netting.
Dry conditions and wintertime usage may reduce the effectiveness of electric fencing.
Dry or frozen ground many cause the post spikes to bend or break if inserted with force. Pilot holes may be needed. We recommend using drivable or single spike posts in hard soils. Double spike posts provide more stability when the ground is soft.